Search results

  1. Trawick78

    Quick load request

    The 130gr sst an the 140s will be the same powder charge rate?
  2. Trawick78

    Quick load request

    270win Nosler brass Hornady 140gr SST H4350 powder Fed 210 primer
  3. Trawick78

    Remington 700 280rem build

    Plan on starting a build what would be the best barrel to go with far as length wise an twist rate, for long range hunting an target shooting, really wanting to build a tack driver, which action, would y’all recommend
  4. Trawick78

    Pressure signs

    I have a Nikon monarch 3 4x16 bdc on my 270. I have various of rifles from 243win 270win 30-06 308 338federal to a 45-70 just that Old 91 modle Abolt hunter 270win is my favorite,once I start practicing long distance it will most likely be with my 243. I would really love to build a 25-06 with...
  5. Trawick78

    270win ABLR Abolt browning

    I loaded some up this evening at all 4 of the seating debts you gave me with 3 of each at 51.0 51.3 and 51.5 since my most accurate group was 51.4 off of the load data that drmike gave me I’m gunna shoot them tommarrow so I’ll be back in touch with you tomorrow night to show you what it does
  6. Trawick78

    Pressure signs

    Exactly the information I’m looking for I will definitely be trying the regular accubonds and I’ll probably never shoot over 400yds with this rifle but I have the bullets an the powder already so I figured that I might as well attempt to get it tuned in, but I do plan on in the near future to...
  7. Trawick78

    270win ABLR Abolt browning

    Gunna load them up tomorrow when I get off work will probably be Tuesday before I shoot again, won’t have very much time to let my barrel cool if I load them tomorrow an try to shoot tomorrow. It’ll probably take 10-15 mins for my barrel to cool down enough to shoot another 3 rounds as hot as it...
  8. Trawick78

    Pressure signs

    Well you seem to be the go to man on the nosler forum from what I can see. Very knowledgeabl, so if you don’t mind what would you do to try to get that group tighter Ik for sure that I need to shoot it with my barrel cold, I seated them at 2.735 witch is .097 jump to the lands and that was at...
  9. Trawick78

    Pressure signs

    With a hot barrel this is what I got so I’m thinking between 51 an 51.5 an play with the seating debt a bit it’ll improve I hope it don’t take very many more shots this old browing kills on both ends 🤣
  10. Trawick78

    Pressure signs

    Thank y’all for all the info I really appreciate it I went an seated my bullets deeper an to 2.735 instead of 2.755 an the things that I was think I was pressure disappeared an I just shot at 51.4 with a no sticky bolt lift an pretty promising looking group but my barrel is hot an is 93* out...
  11. Trawick78

    Pressure signs

    No sir I don’t have anyone that can come assist me I’m relying completely on reloading books Manuel’s forums Etc… I was thinking that the nic under the 2 on 270 was a ejector mark.
  12. Trawick78

    270win ABLR Abolt browning

    I hope you heal well an that virus don’t get you down to bad! An that nic right under the 2 isn’t an ejector mark?an no sir I don’t have a chronograph, but I did notice that I was actually hearing the bullet hit a split second after I shot witch I do t recall ever hearing shooting factory loads...
  13. Trawick78

    Pressure signs

    Bolt was also a little sticky
  14. Trawick78

    Pressure signs

    Yes sir
  15. Trawick78

    Pressure signs

    Nosler brass an ejector marks
  16. Trawick78

    Pressure signs

    I have another forum that I posted the other day that DrMike gave me a quick load for that powder and bullet I loaded it with a charge master lite so I had to load to the nearest tenth so being the 49.9 we’re I got the ejector marks the load off quick load showed 49.88
  17. Trawick78

    Pressure signs

    Okay thanks an no I’m not jamming it into the lands at 3.335 I used the Hornady OAL gauge with the comparator an I got a measurement at the lands at 2.832 so I seated my buttet an checked it with the comparator at 2.755 witch that should have me .077 off the lands unless there’s something that...
  18. Trawick78

    Pressure signs

    270win browning Abolt shooting nosler brass an nosler ABLR 150grain with accuratte 4350 So I run into pressure signs half way through load data start load was 47.2 max load was 52.5 was getting ejector marks at 49.9 can anyone help me out this is my first batch I’ve ever loaded I’m extremely...
  19. Trawick78

    270win ABLR Abolt browning

    Anyone have any advice our see we’re I went wrong please let me know
  20. Trawick78

    270win ABLR Abolt browning

    Well guys I went an shot today an only got halfway through the load data when I noticed pressure signs at 49.9 I started seeing ejector marks so I stopped all together when I saw that I just check the head space on all the brass an it hasn’t changed none. I had 2.044 on the new brass an still...
Back
Top