Search results

I got all the discontinued notices too .

it's an old thread buddy .

looks like your old chrony was in the ballpark .

I haven't been in the store , but it's supposed to be opened under new owners . I have to wonder if they have the inventory the old store had . it was like getting through a corn field maze .

58.7 grains looks to be max at 3242 FPS . it looks like you have room to go up in powder charge . proceed with caution Cartridge : .25-06 Rem. Bullet : .257, 110, Nosler AccuBond 53742 Useable Case Capaci: 60.236 grain H2O = 3.911 cm³ Cartridge O.A.L. L6: 3.250 inch =...

I don't have ram shot Grand

Cartridge : .300 Win. Mag.(@) Bullet : .308, 180, Hornady SP 3070 Useable Case Capaci: 83.130 grain H2O = 5.398 cm³ Cartridge O.A.L. L6: 3.340 inch = 84.84 mm Barrel Length : 24.0 inch = 609.6 mm Powder : Hodgdon H1000 *T Predicted data by increasing and...

Cartridge : .300 Win. Mag.(@) Bullet : .308, 180, Hornady SP 3070 Useable Case Capaci: 83.130 grain H2O = 5.398 cm³ Cartridge O.A.L. L6: 3.340 inch = 84.84 mm Barrel Length : 24.0 inch = 609.6 mm Powder : Vihtavuori N560 *C Predicted data by increasing and...

to me , a burn rate chart is pretty much useless info . quickload gives the info I wanted . if you want to give your ammo specs , one of us guys will give a quickload powder chart . we would need to know BBL length , what cartridge you're loading , and the bullet being used , and...

also , the belt sets the "headspace " between the brass case and the bolt face . I'm not sure if "headspace" is the correct term for this . so the brass can be fireformed into whatever . once the brass is fired , you are much better off forgetting the belt . just size the brass to fit...

brass flows forward . the brass thins near the case head , and we trim it off the neck . eventually the thicker shoulder brass becomes neck brass .

that has never worked for me . I always have to work on the inside and the outside , of the neck .

yes , get another bolt and get the case out . better days are coming !

Jer Bear , how you're finding the lands , only works with that exact same bullet . you need to find the lands with every bullet you're loading . lets say you're going to be shooting nosler ballistic tips and partitions , hornday sst's and sierra game kings . you'll need to find the lands...

if these are reloaded , I'd pull them apart . keep the bullets , primers , and brass . if the brass isn't what you use , find it a home . throw the powder in the yard . factory ammo , try to find it a home . with the cost of this stuff I'd hate to just discard it .

if anyone is interested , I got this email about a week ago . $100 off a labradar . https://buymylabradar.com/

looks great . now I could put that Lapua brass on the shelf without worries .

if I got this right ; you're saying the cases show head separation after the first fire , and this is factory ammo . you ran them through a full length resizing die , but did not load them .

I use the RCBS lube for turning . I would have to load 3 or 4 of these cases, and shoot them , to be sure the problem is solved . not knowing for sure would bug me .

the stuff we planted the end of July is growing great .a week ago it was about a foot high . the deer were nipping at it , but not devouring it .