I have been loading the 150 gr Ballistic Tips in my Remington 7mm Magnums for 30+ years and have taken a lot of Whitetails with them. Needless to say, I'm satisfied with their performance and most of my shots are 200 yards or less. My favorite load has a muzzle velocity of 3010 fps out of a 24"...
I recently acquired 2 boxes of 120 gr Ballistic Tips from an estate sell. These 2 boxes have 100 each in them and I have no idea how old they are. I have heard that Nosler increased the wall thickness on these 120 gr due to bullet fragmentation. I've also read that the boxes of 100 are the "old"...
Here is a little more information. I did have flat primers with all 3 powder charges. Velocity with 53.0 grs was 2883, with 53.5 grs was 2888 and 54.0 grs was 2927. By the way, the factory Remington's clocked 2787 fps. There was also a noticeable increase in recoil with my hand loads vs the...
I loaded 6 test rounds for my Remington 700 in .280 Rem caliber, 22" barrel. Brass is once fired Remington, bullets are 140 gr Accubond, primers CCI 200, powder IMR 4350. Bullets seated .030" off lands. I loaded 2 at 53.0 grs, 2 at 53.5 grs and 2 at 54.0 grs. Distance was 100 yards and shooting...
Well I've made up my mind for the 7mm Rem Mag Sendero. I'm going to load the 140 gr Accubond and use IMR 7828 SSC powder, CCI 250 primers and Hornady brass. My goal will be 3100 fps and MOA. Hope I can achieve that. Thanks for all the replies.
Hey Gunner46, I just hunt Whitetails and Hogs here in SC. I may try the 150 gr BST or the 150 gr E-Tip. Or I may retire my 24" 7 mag and just load 150 gr BT for Sendero. LOL
Thanks every one for the replies. I agree with c. schutte, I love this site and learning from others that have been there and done that. Anyone else with experience to share, please chime in.
I can't "run a load" for you but I can share my experience. I have a Rem model 7 in 7mm-08 with 18.5" barrel. My load is 49 grs H414, CCI 200 primer, 130 gr Speer HotCor bullets and Hornady cases. Chrony shows 2875 average. Have killed a lot of Whitetails with this load but 1.25" group best I...
I would load the 160 Accubond if I could get 3000 fps out of this 26" barrel. I don't want to buy 5 different powders and work loads for all, it would take forever. Not to mention have a lot of wasted money in powders laying around that I wasn't going to use. Do you know what powder would...
I have a Remington 700 in 7mm Rem Mag that I have been loading 150 gr Ballistic Tips at 3050 fps for about 20 years. I average harvesting 3-7 Whitetails a season with them, and for the most part, am very pleased with them. I have tower stands on power lines, huge clear-cuts and big agriculture...
I'm needing a new case trimmer and after reading reviews of several different brands, I'm not certain. Seems like every one I research has both great and terrible reviews. I was wanting an RCBS Trim Pro 90355 but mixed reviews. I'm wanting a kit that I don't have to go back out and buy pilots or...
I'm going to load some 120 gr Nosler Ballistic Tips for a 7mm-08 this weekend and was wondering on bullet seating depth. Any of you guys load these bullets and if so, what seems to be the best "jump" for maximum accuracy? I don't want to shoot all my bullets up experimenting with various seating...