Search results

  1. Alaska

    Fail safe data

    30-06 180gr FS and 165gr FS Factory load is 3.290”
  2. Alaska

    IMR 7828 in 300 Win Mag

    Thank you that’s great !
  3. Alaska

    IMR 7828 in 300 Win Mag

    Just prepped some Winchester Brass with Fed 215 Any good loads with IMR 7828 with 180gr ? 180gr Nosler Part and Swift A Frame
  4. Alaska

    180gr Swift A Frame in 300 WM

    I have an ample supply 180gr Swift A Frame for my 300 Win Mag for moose season. I have IMR 4350 and Reloader 22 powder for reloading ! Anyone have a special recipe?
  5. Alaska

    .308 180 grain partition gold group testing out of my 300 RUM

    I have both the Partition Golds in 180gr .308 and some in 250gr .338 when they added that cup to the bullet sure did stiffen up the Partition for heavy game. I wish Nosler would continue that cup insert in the Nosler Partition.
  6. Alaska

    300 Win Mag with 200 Accubonds for nilgai

    What was your final load with H1000 ?
  7. Alaska

    10mm Auto 180gr powder?

    14.0 of AA9 with 200 XTP CCI 350 primers 1250 FPS load in 4.6” Great Deer Load
  8. Alaska

    .300 Win 175 LRX at 3200 anyone?

    300 Win Mag Bergara Ridge 175gr LRX Hunter 72.2 CCI 250 and Norma Brass Outstanding Load
  9. Alaska

    Tungsten Guide Rod

    Vince Suggest 22 pound spring in G20 ! Good choice on the Tungsten Guide Rod suggest 22 pound spring weight.
  10. Alaska

    New Gen 4 G20

    I have Talon Grips on my Glocks .
  11. Alaska

    IMR 4451 in 338 Win ?

    Can go wrong with 71.0 of IMR 4350 with that 225 Swift AFrame in 338 WM……..good proven load.
  12. Alaska

    Tungsten Guide Rod

    Definitely the heavier spring I run 22 pound both in my Glock 20 and Glock 21 ( 45 Super). It saves your lower frame from battering and slows down your slide for Full Power Loads . The Stainless Steel Rod is a nice upgrade from Glock plastic rod. The heavier Tungsten Rod just adds weight up...
  13. Alaska

    New Gen 4 G20

    For Factory Ammo the best I have tested for velocity . Grizzly Ammo just a tad better than Underwood in 10mm.
  14. Alaska

    Tungsten Guide Rod

    For my G20 the Glock Store Heavy Tungsten 22 pound spring and 4.6” KKM barrel 10mm Auto Berry 220gr FN FP with 8.6 of Longshot Starline Brass with WLP 1200 FPS ( My Bear Defense Load for Alaska) in my G20 Gen 4
  15. Alaska

    Tungsten Guide Rod

    45 Super - I have pretty much settled on 8.6 of PP as my carry load with 4.6” KKM and 22 pound spring. 250 Gr RNFP CAMPRO at 1065 fps for Bear Protection here in Alaska in G21.
  16. Alaska

    Tungsten Guide Rod

    Yes been running the GS Pure Tungsten on G20 with 22 pound spring and also on G21 (45 Super) Adds some weight up front keeps muzzle rise down on recoil functions very smooth with KKM barrels.
  17. Alaska

    Swift A Frame 225gr

    I bounce between 225gr Nosler Part and 225gr Swift A frames in 338 Win. My 338 RUM always gets the A Frames 225gr with RL 22. For heavy game that Swift A Frame is a great bonded bullet and great accuracy also.
  18. Alaska

    45 Super did well

    Well got my G21 Gen 4 setup for 45 Super KKM Barrel 4.6” 22 pound Spring (No Difference with 24 pound) +4 Mag springs in 13 Round mags Load Work up Fed Nickle 45 ACP (Non +P Brass) Small Primer Rem 7.5 BR primer 250 Gr Hardcast FPRN Tek Coated 22 BHN 1.190” Power Pistol 8.0 = 1000 FPS 8.5 = 1065...
  19. Alaska

    45 Super did well

    I am in the process of converting a G21 gen 4 to use 45 Super here in Alaska any suggestions. I plan on using the G21 for Bear Protection !
  20. Alaska

    Retumbo for a 338 Win Mag.

    I have not used the 200 ET in the 338 WIn Mag for hunting. I have only used 225gr /230gr in 338 Win Mag in Alaska. Yes my Reloader 19 / 225 gr load is a velocity duplication of the Federal High Energy load with 225gr of yesteryear, it’s a stout load . But if you look on Speer and Alliant...
Back
Top