Search results

  1. mjcmichigan

    Leupold Vari-X 2.5-8 adjustments

    Thank you!
  2. mjcmichigan

    Leupold Vari-X 2.5-8 adjustments

    That sounds about right… first shots were over a foot high at 25 yards.. turned it about 4 revolutions to get it near target.. so a form of inches at 100. Thank you very much. I’ve never seen one like that before…
  3. mjcmichigan

    Cheap .30cal Heavyweights

    I looked at the bullets rated Mv is 1600-3100. So next I looked for 300BO recipes for that bullet… and they don’t have them. Instead they had 2 225 grain bullets - both target bullets… Does that imply the 220 gn RN. #3090 rated Mv 1600-3100 and the only Hornady 308 rated for Dangerous...
  4. mjcmichigan

    Leupold Vari-X 2.5-8 adjustments

    Hi. I got this scope, Leupold Vari-X III, 2.5-8x I’ve never seen an adjustment like this. No MOA or MILRADs, just numbers.. When I adjusted it, I felt no clicks.. Can anyone tell me what these markings are referring too?
  5. mjcmichigan

    270win ladder Barnes TTSX130gn, Norma brass, RL17

    Took it out today with three test groups. 53.8 shot 3085, 3066 and 3100. SD 17, ES 34 Next one gets more interesting 54.1. Shot 3099,3100 and 3105, SD 2, ES 5 Next one right there 54.4 shot 3115, 3121, 3119. SD 3 and ES6 I don’t think I’ve ever had loads in the single digits for SD and ES...
  6. mjcmichigan

    270 Win SGK 130gn H4831 ladder test.

    Bought two pounds of RL17 today at Joe Gunn Sanford MI. He has a smattering of powders. rl7,10,15, 19,22,23,25. Took the last two 17’s, and didn’t see any 26.
  7. mjcmichigan

    270 Win SGK 130gn H4831 ladder test.

    Thanks Dan.
  8. mjcmichigan

    270 Win SGK 130gn H4831 ladder test.

    No signs of pressure at 59 grains… will push it a little harder.. I would like to get it up to speed. Case volume was pretty tight..so not sure I can get far.. but will work up in 0.3gns..
  9. mjcmichigan

    270win ladder Barnes TTSX130gn, Norma brass, RL17

    I have some 6.5 and was thinking about it. Have some partitions and grand slams at 140gn.
  10. mjcmichigan

    270 Win SGK 130gn H4831 ladder test.

    Reloader 17 looks pretty happy…
  11. mjcmichigan

    270 Win SGK 130gn H4831 ladder test.

    I think you are right. Most the test barrels are 24” and this one is 22”. So figure I lost 50 for there..
  12. mjcmichigan

    270 Win SGK 130gn H4831 ladder test.

    Well, tried a new jug of H4831sc, and basically got the same velocity. The old jug of powder is fine. Using the Barnes TTSX 130 and RL17, I’m getting 210fps more than I’m getting from H4831. Interestingly, comparing manuals. Hornady Recipes vs Sierra Recipes…Sierra stops at 58.6, but...
  13. mjcmichigan

    270win ladder Barnes TTSX130gn, Norma brass, RL17

    1961 Model 70 Featherweight Barnes 130gr TTSX, Norma Brass RL17 51.4—2922 51.7—2927 52.0—2913 52.3—2954 52.6—3008 52.9—2994 53.2—3045 53.5—3060 53.8—3067 54.1—3077 Kinda excited about this ladder. 53.5-54.1 is looking like a node 51.4-52.0 looks like a node.
  14. mjcmichigan

    270 Win SGK 130gn H4831 ladder test.

    1961 Winchester Model 70 Featherweight 22” barrel Leupold VariX 3.1 2-8x H4831 Sierra GameKing bullet #1820 130gn SPBT Magnetospeed 56.2—2634 56.5—2692 56.8—2726 57.1—error no reading 57.4—2742 57.7—2757 58.0—2722 58.3—2795 58.6—2858 59.0—2866 Looking at H4831 which should be running quite a...
  15. mjcmichigan

    UPDATE

    Wishing you well Vince! New Mexico sounds awesome!
  16. mjcmichigan

    TSS #9 / 2.5 OZ pattern handload. 40 Yds/ 10" circle/ 530 pellets. Shot from my 870 Supermag 3.5". Indian Creek .665 choke. 2.5 X 8 Leupold.

    Pretty solid. Been reading about guys using 410’s and TSS #9 to take turkeys… I’ve taken 1 Tom at 25 yards with a 20 gauge beneli super sport(I’m not a nice man). Flattened that Tom. No floppy, just bang flopped.. so with the TSS product.. I can see it being pretty potent medicine.
  17. mjcmichigan

    Unloading Bullets Kinetic Puller hack

    So I have a well used bullet puller, maybe excessively worn puller (flood ammo that went click- silence, I’d pull the bullet and salvage the cases… Well. The cartridge holders would not hold the bullets…so very frustrating and slow. Today, I used my shell holder from My press, voila! That...
  18. mjcmichigan

    E-tip w/o grooves?

    Thanks Jim! Was wondering about that!. I know Dr Mike has had tremendous success with etips in his WSM’s and I was considering avoiding lead in my game loads.. just to avoid some risk of lead ingestion.
Back
Top