Can someone run a quick load for me? The powders I have to try are IMR 4166, IMR 4064, and ramshot big game. Thanks in advance for any help.
416 Taylor
Speer 350 grain mag tip
25.5” barrel.
Yesterday I finally got my first deer of the season. For some reason I have not had any luck this year, and this is the first year I’ve went this long without harvesting atleast several does. Shot this big bodied buck yesterday morning with my Winchester safari 416 Remington. Was using Woodleigh...
Hey guys can someone run a quick load for me? Working on some 44 mag loads with no mag primers, so going through my powders that will work with standard large pistol primers. I have hardly any unique left which is my standby for working loads in 44 magnum. Have plenty of H110 but no mag primers...
Shot these a a week or so ago, and forgot to post them. Overall still very happy with the accuracy I’m getting out of these two rifles. In my 416 rem I switched from Hornady brass to Norma. Used the exact same load and picked up 58fps over the Hornady brass. Which I figured there would be some...
Can someone run this quick load for me?
9.3x62
250 grain Accubond
COAL 3.357”
22 inch barrel
60,000 PSI
Powders would be IMR 4166, Reloader 16, Ramshot big game. Thank you so much in advance!
Sent from my iPhone using Tapatalk Pro
416 Remington magnum, woodleigh 340 grain PP with IMR 4166. 24” barrel with a COL of 3.600”. Thanks in advance, I really appreciate it.
Sent from my iPhone using Tapatalk Pro
Was very happy with this rifle for its first trip out. So far IMR 4064 and 300 TSX shoots great. Unfortunately BL-C(2) and the 350 TTSX continue to disappoint mostly. I never could get that powder and bullet to shoot in my #1 416 rem either. Although the first load came in slightly under 1 1/2”...
Well after over a month of waiting my new rifle showed up. It spent several weeks in Detroit, and several at Memphis in the USPS centers. But I’m finally in possession of a model 70 safari express in 416 Remington. Rifle looks great already got some 300 tsx loaded up to try out. I’ll have a...
Finally finished with the 300 gr tsx load in my 416 taylor improved. Settled on IMR 4166, and can't remember velocity but its around 2700 fps I believe. Also tried out the 350 ttsx load again in my 416 rem mag, and it has shown to be quite good. I did move scope wrong way, so one group is a bit...
Been messing with my ruger #1 in 416 remington magnum for awhile now. Mainly trying different things with the forend. For the last little while I've been working on 350 TTSX and IMR4064. Finally finished that load Saturday, and I have to say I'm pretty happy with it. Velocity ended up being...
Can someone help me out with this i was able to find some powder that should be usable in this cartridge.
416 Rem Mag, hornady brass, IMR 4451 powder, 350 grain barns TTSX, and 24" barrel. Thanks in advance I really appreciate it.
Sent from my SM-N960U using Tapatalk
416 taylor improved, 25.5" barrel, H2O capacity for fired brass norma brass is 97 grains. Bullet is 400 gr hornady dgx , and powder is IMR 4166. Thanks in advance for any help!
Sent from my SM-N960U using Tapatalk
I decided to bed my #1 in 416 Rem Mag. The gun has been a solid 1 1/8" to 1.5" in gun for me. I did start to notice it shifting zero though, so I decided to give it a try. Ive done several bolt actions now, but this was a bit different. After searching and searching the internet I came up with a...
Was starting to think this rifle was cursed, since I never see a deer with it lol. Well this afternoon I had a big doe come out. Shot was right around 110 yards very slightly quartered away from me. At the shot she went straight down on her back with all 4 legs sticking up in the air. Load was...
Managed to take a good doe this evening. About 65 yard shot, and she made it about 20 yards downhill. The 300 TSX at 2700 fps actually expanded well on behind shoulder lung shot. I had planned on shoulder shot, but I guess I'm just to used to behind the shoulder shots. After seeing expansion...
Well after keeping up with Guy's thread on his #1's. I finally decided to just go after it. Ive always thought the #1 were one of the best looking American rifles ever made, but sadly had never even handled one. So off to gunbroker I went and picked up a #1 tropical in 416 rem mag. I knew I...
I did this earlier on, but did it with once fired brass and resized. Lately I've been seeing where this should be performed on fully formed fired brass. Ive hit some nice speeds in this rifle with 350 grain, and 400 grain bullets without hitting pressure signs still. So today I measured brass...
Decided i wanted a little more magnification on my 416. Could not find a leupold vx3i 2.5-8 to save my life. So I decided to try the vx freedom line in 2-7. Ive had one vx freedom on a 9.3x62 for a while now with good luck. So maybe it will hold up hopefully. After getting it set I shot a group...
It appears around 2,600 fps is going to be the sweet spot for the 350 MT in the 416. My newest 9.3 has only shot the lighter bullets so far, 232 gr ecostrike and 250 gr AB. Copied the load I been using in my mauser 98 9.3x62 which is 285 gr PPU RN and 65, or 66 gr of big game. 65 grains produced...
Today I finally finished the velocity ladder with 20 powder charges for this rifle. I still have not hit a max charge but I'm done, and see no need for going any higher. I've well exceeded the speed I thought I could get. Bolt lift is still easy, primers are still round, and no shiny Mark's on...