Search results

  1. S

    270 Win 124 Hammer Hunter H4831SC

    I decided to get one of my favorites out and see what I could do with the 124 Hammers. I am using some old WW brass (new) and CCI200's. I started them .050" off the lands in my rifle which resulted in a 3.200" COAL for them. 60 That charge was right at 3009 average, so I kept pushing...
  2. S

    300 RUM 189 Hammer Hunters H1000

    So I got a bunch of Hammer's to try out. The 300 RUM has been a pretty easy one for the most part. I decided to use H1000 and CCI250's for this project. It was my first foray into this bullet and cartridge and they don't seem to typically track with data from other weights of bullets...
  3. S

    300 H&H first try

    I have a nice 300 H&H, M70 P64.. It has taken me awhile to get the mounts the way I wanted. For some reason if I mounted it on flat rings, I couldn't get enough elevation out of it. Well, I used the old Redfield Jr base on Burris Rings with the eccentrics. I got that worked out and through...
  4. S

    338-06

    I had a SS M70 Classic in 30-06 in my safe for quite awhile. It has the grey laminate stock on it and for awhile I couldn't decide what to do with it. I already have one great 30-06 so decided to send it off to JES for a rebore. I sent him a dummy with a 225 AB for throating, knowing that it...
  5. S

    300 RUM 220 Scenars N570

    I decided a couple weeks ago of trying to see if I could get the 210 ABLR's to shoot in my RUM. Well, I tried all of the good powders I have on the shelf, 570, RL33, H1000, Retumbo and SB HD. I worked up in speed to get a usable load and tried 4 each of each specific powder charge. To my...
  6. S

    338 Win Mag 275 Speers RL26

    I have had about 300 of these old gems kicking around my bullet shelf for quite awhile. They used to shoot decent in my old 338 with RL22 so I decided to give them a shot in the Alaskan with RL26 to see what'd they do.. Cartridge : .338 Win Mag. Bullet : .338, 275, Speer...
  7. S

    338 Win Mag 250 Scenars RL26

    I used a little RL26 a few years back with 250's in the 338 Win and also in my 35 Newton. I remember some good speeds, and decided to try the Lapua Scenar and see what my old Alaskan would do with this combo. Anyhow, this is what the QL looks like for the combo. Cartridge : .338...
  8. S

    Garmin Chronograph

    Anybody got one or have one backorder? I just put one on BO thru Grafs, and I have been a long time Magnetospeed user, but this little devil seems to be answering alot of the questions I wanted for a new chronograph. https://www.garmin.com/en-US/p/771164
  9. S

    Zero Check 500 JRH

    My boy came home for the 96 on Veterans Day so we decided to do a zero check on his 7x57 and I wanted to check the sights on my pistols. I have kinda decided to use the 500 JRH this year. I have 440 cast WFN's loaded with 12 grains of Unique in Starline case with CCI 300's. For the iron's...
  10. S

    Woodman Arms Muzzleloader

    I got a new Muzzloader the other day. I had Mark Woodman make up one of his Patriots with a 1-18" Brux 45 caliber barrel. The plan is to shot 45 caliber bullets with no sabot and smokeless powder in it. I haven't ever ventured into this area but I am assembling most all of the stuff. Had to...
  11. S

    Kimber 338 Federal

    I picked up a Kimber 338 Federal back in the winter, but I got some dies and a bunch of Sig brass, used the expander mandrels and necked up 50 pieces. Decided to try it out with a few bullets I had on hand. JD sent me some 200 BT's which I was hoping were going to be the stars of the show. I...
  12. S

    Wyoming Vet Hunt

    Well, we put the 2nd annual Wyoming Vet hunt to bed a few days ago. Round trip, we drove about 4400 miles and used about 600 gallons of diesel fuel. My brother rode with me from NY to Wyoming and the rest of the crew came from Cheyenne, Washington State and Colorado. Had a great camp as well...
  13. S

    175 grain ABLR elk recovery

    Here is a 175 ABLR I pulled from a bull from Wyoming. Shot was 605 yards and it smashed the scapulas on both sides and was resting in the meat on the hide on he far side during skinning. 90.4 grains retained weight
  14. S

    M70 264 WM FWT Maple stock

    I have been looking for one of these dark maple stocked SHOT rifles for awhile. I know some folks wanna gag over maple, but for some reason, the dark maple and SS just looks great. Anyhow, I wanted a 270, but I found a decent deal on the 264, so I nabbed it. I pulled the mounts...
  15. S

    M70 P64 243 Win Varmint

    I picked this ol heavy bird up a few months ago. Always wanted one of the heavy barreled P64's and this one was on GunBroker for a decent price. Finally got the right rings for it and got it shooting a little. I haven't loaded anything specifically for this rifle, it is a load I have for a...
  16. S

    Guy Miner costs me money!

    So, I saw that Guy put the new curved arms on the CoAx and Jesus, I literally couldn't find a set fast enough... Mike was the one who got me onto a CoAx quite a few years ago and man, I couldn't love a press more than it. From 223 to my 50-90 that press is just awesome.. The curved jaws are...
  17. S

    7-08 Hunter 162 ELD (Hunter and RL17)

    I have a little Kimber Montana 7-08 I got last year. Well, due to moving and bunch of other things, I never had time to develop a deer load for it. Well, I kinda wanted to be adventurous and see if I could get a 162 Hornady ELD to fly decent from the rifle. My first move was RL17 and Hunter...
  18. S

    M70 7x57 Featherweight

    I have wanted one of these for years. I remember when they came out and then they only made 250 for Cabelas and 250 without the Cabelas stuff on it. I ended up grabbing the Cabelas version. Has a couple knicks in the stock but otherwise decent. Should be a fun one to get warmed up. I...
  19. S

    Shiloh Sharps 50 2 1/2”

    I finally got my big #1 Sporter. Took a few years but I grabbed it on Saturday. It’s like learning to handload all over again with these. At least for me, it’s 1.5-2F Blackpowder, 700+ grain bullets and a bunch of experimenting but I think I’ll enjoy working with this.
  20. S

    Super Trickler

    Put a SuperTrickler on order a few weeks back. They say it'll come in around June or July. Read and watched a ton on them, any of you all used one yet? https://supertrickler.com.au/
Back
Top