Any chance someone can run velocities on Quickloads for me?

badaxeriverman

Beginner
Sep 29, 2024
172
146
I’m just curious about my velocities, but since bow hunting season is starting to go prime I don’t plan on going back to the range to run my loads across the chronograph to figure out my drops. Could someone run velocities on two of my loads if they have the quickloads program! If so they’d be my hero!

The first one is an 18.5” barreled 35 rem using 41.5 grains of IMR3031 and a 180 grain hot core. Don’t remember the overall velocity, but I loaded to crimp line and use a lee factory crimp die on it. Guessing the 2.470” range for OAL? Sorry, forgot to measure, but I know it’s to the crimp groove. I looked at Speer load data and just listed the OAL here for numbers.


The 2nd load is out of my 18.5” barreled 35 whelen using the same .358” , 180 grain hot core. Loaded with 56 grains of H4895 at 3.030”. I use a cci 200 primer. If I use the same primer for the 35 Remington to.

We’ll see how far I’m off. I’m guessing 2300fps for the 35 Remington and 2500fps for the 35 Whelen?

Thanks for any help!
 
Back
Top