AR ejection

hogginlong

Beginner
Apr 14, 2017
115
1
Second time out with the AR Stoner 22 Nosler and all's working good with the new extractor(broke after 14 rds). I fired some w/o the brass catcher and it's ejection is about 1 o'clock. Is there any way to adjust this to about 3-4 o'clock? Heavier buffer maybe?
 
You can use a heavier weight buffer and/or spring or go with an adjustable gas block.
I just put mine together last night and it's ejecting the brass at 3:00.

JD338
 
JD338":3dzyurxf said:
You can use a heavier weight buffer and/or spring or go with an adjustable gas block.
I just put mine together last night and it's ejecting the brass at 3:00.

JD338

Wouldn't he need to go lighter if it's already at 1:00?
 
I'm thinking I'm not going to worry about it. I'm getting groups under an inch at 200 yds with 2 different loads. I'd just like to get brass back while hunting but probably won't.
 
hogginlong":16vbxp5m said:
I'm thinking I'm not going to worry about it. I'm getting groups under an inch at 200 yds with 2 different loads. I'd just like to get brass back while hunting but probably won't.

What are your loads?

JD338
 
55 vmax,33.0 CFE and Hornady 68 bthp match,27.5 Varget. Rem 7 1/2 primer and 2.26 oal for both. Need to chrono next time out.
 
Back
Top