First tries with Annealeez

Alderman

Handloader
Apr 5, 2014
1,143
207
Fighting a cold here so decided to head to the shop and try out the Annealeez for some low impact exercise.
I’ve acquired quite a bit of 223 brass and wanted to try to anneal them before turning them into 6mm, 6.5mm and 7mm TCU ammo.

Machine worked well. The Gen 3 model has a muffler clamp for a propane bottle holder.
Was a bit skeptical but I think its probably much easier to adjust the location of the flame with than the previous models that had a hose and bolted on torch holder.

Did some 308 and 30-06 brass later.

 

RL338

Handloader
Mar 23, 2017
928
968
Years ago I built one like the one you have there. Skips Annealer on u-tube was what I built. Works like a charm.
 
Top