Notice: This site is not mobile friendly, we recommend you download tapatalk for a mobile friendly experience of our forum.

It is currently Tue Feb 18, 2020 6:45 am

Shop Nosler

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Tried a .44 Mag 629 4inch
PostPosted: Tue Mar 13, 2018 5:45 pm 

Joined: Tue May 01, 2007 9:05 am
Posts: 759
Went to a Nashville Gun range today to look at and try a .44 Mag. Thoughts and impressions it was a used gun they said they took in trade. It was the only Smith & Wesson .44 Mag they had and while it had a nice trigger, now the bad news the thing was hard to open the cylinder. I was using PMC 240gr .44 Mag shells. When I turned it in I told the Man at the counter it was hard to open and he tried it and could not open it, he even pushed the cylinder against the counter and it still did not open. Glad I was able to get through 25 rounds. I did like the feel and balance of this gun.
Thoughts and impressions felt nice in my hands & had wood grips, front sight had a red insert and I found it hard to see sharp, yes my eye's are getting worse.
I wanted to shoot one because I have been thinking about buying one and did not know if the recoil would be to stiff for me, I felt it was not to bad at all, but would not want to shoot over 50-100 rounds in a row. I fired these at 7 to 15 yards no I don't shoot handguns a lot anymore and it showed. When I was going to buy one of these last year I ended up with another shotgun. I could always use another one in Iowa where I live as I bird hunt a lot.
I still am not sure if I really need a .44 Mag for a gun in bear country when hiking.
Here is my Target the good the bad and the ugly. Fun Day and I will have to think about this.


Attachments:
image.jpeg
image.jpeg [ 678.51 KiB | Viewed 1172 times ]
Top
Offline Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Tue Mar 13, 2018 5:51 pm 
User avatar

Joined: Sat Oct 30, 2004 6:45 pm
Posts: 22158
Location: Cheyenne, WY
That is odd, the cylinder thing, Smiths are known for their quality

_________________


Weatherby...There is no replacement for displacement!


My blog. Please Comment and Follow
https://thehandloadinglog.wordpress.com


Top
Offline Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Tue Mar 13, 2018 6:49 pm 
User avatar

Joined: Mon Mar 11, 2013 6:02 am
Posts: 6508
Location: East Coast
My question is were you shooting lead and was the forcing cone beveled and opened up to shoot lead bullets. S&W revolvers are known to have a tight forcing cone and need to be opened up if you plan on shooting a lot of lead threw them. They will shave lead and it will be deposited on the crane causing the cylinder to jam and lock up.


Top
Online Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Tue Mar 13, 2018 7:11 pm 

Joined: Tue May 01, 2007 9:05 am
Posts: 759
I don't know I just shot Jacketed Soft Points. Only had the gun in my hands for a short time and the only revolver I own is a Ruger Single Six. I have zero experience with double action revolver till today. I never thought to even look truck driver.


Top
Offline Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Tue Mar 13, 2018 9:28 pm 
User avatar

Joined: Thu Nov 04, 2004 12:08 pm
Posts: 20064
Location: Cedar Springs, MI
I have 2 S&W 629's, one with a 6 3/8" barrel and the other one has a 3" barrel. Both are smooth as silk to open/ close the cylinder. They are great revolvers and very accurate.

JD338

_________________
Speed sells but Accuracy kills.

Noslers Rock


Top
Offline Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Wed Mar 14, 2018 2:12 am 

Joined: Mon Dec 26, 2016 7:35 pm
Posts: 1271
I have the 629 with a 6” barrel and it’s a dream to shoot. I love getting it out because when I take newbies to the range, it’s a huge confidence builder when they start doinking bullseyes. I have shot mostly lead, but have had no issues with shaving. Recently I’ve been changing over to jacketed. I do load 44 specials for it as well, and most love it with both specials and mags. Great gun, happy to own it. If I was allowed 1hand gun this might be the one. My Kimber 1911 Target would be I the running as well.
You didn’t mention the grips. I have the rosewood ones. I see a lot with hogue style.
I do carry it in bear/wolf country.


Sent from my iPad using Tapatalk


Top
Offline Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Wed Mar 14, 2018 2:18 am 

Joined: Thu Oct 15, 2009 11:46 am
Posts: 465
Location: Central Missouri
It is possible the extractor rod has started to unscrew causing it to bind against the front of the underlug. I have seen this happen with other revolvers, some to the point they wouldn't open at all. Heavy recoil over time can cause this.

I carry a 4 inch .44 Redhawk as a backup gun when hunting, especially after finding large cat tracks in areas where I frequently hunted.

Ron

_________________
"when in doubt, get the Whelen out!!"


Top
Offline Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Wed Mar 14, 2018 6:21 am 

Joined: Mon Oct 30, 2017 5:28 am
Posts: 259
Not bad shooting. I have a 629 five inch and a four inch 29. The 629 is considerably beefier than the old 29 I have. I also have a 4 inch 57. I shoot almost all hard cast. The first few times I shoot, I polish the bores with JB compound and I have little leading problem. But that is with hard cast. I don't have one but suspect the Ruger Redhawk is a more durable revolver.


Top
Offline Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Sun Apr 01, 2018 6:18 am 

Joined: Thu Apr 06, 2006 8:42 am
Posts: 14679
Location: Washington State
rjm158 wrote:
It is possible the extractor rod has started to unscrew causing it to bind against the front of the underlug. I have seen this happen with other revolvers, some to the point they wouldn't open at all. Heavy recoil over time can cause this.



I suspect that this is the cause for the cylinder not opening. It can happen if a S&W is fired a fair bit and hasn't been maintained. Very easy fix. Screw it back in! :grin: Cleaning it well before screwing it back in/tightening it, and adding a tiny drop of non-hardening Loctite will solve the problem.

Common issue on high-use S&W revolvers. I love 'em and put up with that little problem easily.

Re the power/recoil issue - ya - full power 44 mag loads are pretty rough on the shooter! Your target looks decent. Good thing about the 44 mag is it can readily be loaded to different power levels. Along with a lot of other shooters, I tend to load the 44 into two distinct power levels:

1. General practice load. A 240 - 255 gr bullet at 900 - 1,000 fps. This is only a bit of a step above the good ol' .45 ACP factory loads, and very easy to shoot well from either a S&W or Ruger revolver. With a flat-nose bullet, they're rather effective on game as well.

2. Max or near-max level loads with 240 - 300+ grain bullet shoved hard! Whoo-Wee! Some of these are brutal to shoot, but my goodness, they pack a punch. For some reason I don't feel a need to shoot a bunch of these. Hah! Year and a half ago, buddy of mine shot through a bear we'd been tracking with his 44 and a 300+ grain hard-cast bullet. It had been wounded by another hunter. We came upon it in the brush at about 4 yards. I had my 30-06 in hand, but my buddy had his 44 out in a flash and ended that bear very quickly.

I've had several different 44's over the past 30+ years, searching for the "right" one. Believe I found the right one for me ten years ago or so, with a 5" full-underlug S&W 629. It's been accurate and reliable from day one. Not bad to carry either. I have it with me in bear country.
Image

Regards, Guy


Top
Offline Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Sun Apr 01, 2018 10:17 am 

Joined: Mon Oct 30, 2017 5:28 am
Posts: 259
My 629 is like Guy Miner's. I sure like it.


Top
Offline Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Sun Apr 01, 2018 4:56 pm 

Joined: Fri Dec 13, 2013 5:23 pm
Posts: 2575
Location: Echo, Oregon
One of our guides carries the 629, it is a handful but fun to shoot.


Sent from my iPhone using Tapatalk


Top
Offline Profile  
Reply with quote  
 Post subject: Re: Tried a .44 Mag 629 4inch
PostPosted: Mon Jan 20, 2020 7:49 pm 

Joined: Tue Sep 28, 2010 4:43 am
Posts: 69
21 grs of 2400 with a 240 hard cast SWC (429421 to be exact) was Elmers book load. I shot 19.5 most of the time because it kind of took the sting out of it. The 4" model 29 was also Elmers preferred side arm. The early pinned barrel recessed cylinder 29's couldn't take a steady diet of this load. I loaded this bullet a lot in front of 9 grs of Unique to be kind to the old 29. Moved that old blued gun off for a 5" 629 Classic. The new frame is supposed to take the pounding a little better. My current favorite N-Frame is a 625 4" Mountain gun. The 45LC is kind of pleasant in the hand with round-butt Pachmeyers. A 250 hard cast Keith in 45LC doesn't give up much to the 44. Still have a lot of 429421's waiting for a barrel.

I concur on the ejector rod opinions. They do back out after a while. Have had it on N-Frames and K-Frames.


Top
Offline Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ]  Moderators: JD338, NOSLER, FOTIS, NoslerV, Nosler4

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

This forum is:

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net