357 plinking load...

After much research and deliberation I've found a nice easy shooting practice round for the 357's.

Starline 357 mag brass
Small pistol magnum primer (standard primer would be fine too)
4.5 grains of Titegroup powder
125 grain semi jacketed hollow point bullet

I had 357 brass and mag primers already... That's why this wasn't done with 38 brass.

That load is soft shooting, not really loud, and sufficiently accurate for shooting steel in the back yard....chrono'd 855 fps from a 4 inch SP101.

That's a great load to remember!
Thank you Ridgerunner!
I believe I will use that for my .357's as well
I have 30 Winchester cases, and 100 CCI cases to try that one in.

Sent from my moto e5 play using Tapatalk

Thanks for sharing Ridgerunner. Looking forward to loading these.
Duane

If you use this with 38 brass, drop the powder charge down to 4 grains.

Ridgerunner665,

Thank you again! I will keep that in my .38 Special load book.

Sent from my moto e5 play using Tapatalk