Notice: This site is not mobile friendly, we recommend you download tapatalk for a mobile friendly experience of our forum.

It is currently Tue Apr 23, 2019 11:43 pm

Shop Nosler

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: New Nosler 26 not grouping well
PostPosted: Mon Apr 08, 2019 2:20 pm 

Joined: Sat Mar 16, 2019 11:35 am
Posts: 4
So I took my new Nosler Western Rifle (chambered in 26 Nosler)to the range yesterday to perform the barrel break-in procedure. I went through two boxes of Nosler Custom Competition 140gr and was not able to get it to shoot sub 2” groups which is very frustrating.

I had a Leupold VAR-X III professionally amounted on a new Leupold Back County pic rail mount and new Leupold Back Country Cross Slot Rings before taking it to the range. Throughout the barrel break-in process, the groups did not improve but the ease of cleaning did so it’s confusing to me.

I called Nosler and they aren’t sure what is causing it so I offered to take the scope off and mount it on another rifle of mine that routinely prints MOA or better. This should at least eliminate my scope being the issue. Assuming the scope isn’t the issue, what else should I do before sending it back to Nosler? Picture of target below.


Attachments:
0A2484C1-C8C3-40F9-BEDB-83EC1472FEAA.jpeg
0A2484C1-C8C3-40F9-BEDB-83EC1472FEAA.jpeg [ 1.89 MiB | Viewed 144 times ]
505017BD-28E0-4CFA-80BF-97600869F971.jpeg
505017BD-28E0-4CFA-80BF-97600869F971.jpeg [ 2.12 MiB | Viewed 144 times ]
52540B76-9B49-48C2-94FA-017A6EFD5C9E.jpeg
52540B76-9B49-48C2-94FA-017A6EFD5C9E.jpeg [ 2.22 MiB | Viewed 146 times ]
CFC819FA-9C50-42B6-9295-0269CD7B0C25.jpeg
CFC819FA-9C50-42B6-9295-0269CD7B0C25.jpeg [ 2.5 MiB | Viewed 146 times ]
Top
Offline Profile  
Reply with quote  
 Post subject: Re: New Nosler 26 not grouping well
PostPosted: Mon Apr 08, 2019 4:52 pm 
User avatar

Joined: Thu Mar 01, 2007 4:10 pm
Posts: 5443
Location: British Columbia
Welcome to the forum. I would check the scope first as well, if it isn't the culprit then it may need a trip back to Nosler. You may wish to try another type of factory load too before it potentially heads back but with a different scope.

_________________
Saving the world one 35 Whelen at a time :)


Top
Offline Profile  
Reply with quote  
 Post subject: Re: New Nosler 26 not grouping well
PostPosted: Mon Apr 08, 2019 5:11 pm 

Joined: Wed Nov 08, 2006 2:49 pm
Posts: 31943
Location: Northern British Columbia
Welcome to the forum, Mczar. Gerry has given you great advice. Few things are more frustrating than a rifle that doesn't produce the accuracy we are expecting. For sure, eliminating the scope as the culprit is the first step in resolving the issue. If that fails to give a definitive answer, then it would be worth speaking with the people at Nosler. They are a good company that will act honourably.

_________________
Fortiorum fortia facta


Top
Offline Profile  
Reply with quote  
 Post subject: Re: New Nosler 26 not grouping well
PostPosted: Mon Apr 08, 2019 6:40 pm 

Joined: Mon Nov 25, 2013 8:27 pm
Posts: 1249
It may just be that your rifle does not like that bullet and/or ammunition's bullet/powder combination.
I would try another bullet, bullet/powder combo or even some factory ammunition first, before "jumping the gun" on calling it a rifle or scope issue.

While many companies offer quality rifles that are capable of great accuracy today, there is still no guarantee that they will shoot sub-MOA with the bullet that you are hoping to use.

While the bullet you are using is a match bullet and should shoot well, the 26 Nosler is a hunting cartridge, so you may want to try some hunting bullets to see if performance and accuracy improves. I would try the AccuBond first.
In my experience, it is the easiest bullet to work up loads with, and has proven to be the most consistently accurate bullet I have used in a large variety of cartridges. The LRAB can also be very accurate, but is a little more finnicky in finding good loads compared to the AB. And you could also try the Ballistic Tip or the Partition.


Top
Offline Profile  
Reply with quote  
 Post subject: Re: New Nosler 26 not grouping well
PostPosted: Mon Apr 08, 2019 7:22 pm 

Joined: Sat Mar 16, 2019 11:35 am
Posts: 4
DrMike wrote:
Welcome to the forum, Mczar. Gerry has given you great advice. Few things are more frustrating than a rifle that doesn't produce the accuracy we are expecting. For sure, eliminating the scope as the culprit is the first step in resolving the issue. If that fails to give a definitive answer, then it would be worth speaking with the people at Nosler. They are a good company that will act honourably.


I’m going to head to the range tomorrow with the same scope and one of my .308s and hopefully this will be the issue. I did speak with their customer service and they were very helpful and showed a lot of willingness to help and they’re going to expedite some ammo that I ordered a while ago (Accubond) so that I can try out a different load.


Top
Offline Profile  
Reply with quote  
 Post subject: Re: New Nosler 26 not grouping well
PostPosted: Mon Apr 08, 2019 11:06 pm 

Joined: Wed Nov 08, 2006 2:49 pm
Posts: 31943
Location: Northern British Columbia
The AccuBond is a fine bullet and has superb terminal performance. If it shoots well for you, you will be golden.

_________________
Fortiorum fortia facta


Top
Offline Profile  
Reply with quote  
 Post subject: Re: New Nosler 26 not grouping well
PostPosted: Tue Apr 09, 2019 8:05 am 
User avatar

Joined: Sat Oct 30, 2004 6:45 pm
Posts: 21827
Location: Cheyenne, WY
Change the scope out

_________________


Weatherby...There is no replacement for displacement!


My blog. Please Comment and Follow
https://thehandloadinglog.wordpress.com


Top
Offline Profile  
Reply with quote  
 Post subject: Re: New Nosler 26 not grouping well
PostPosted: Tue Apr 09, 2019 1:47 pm 

Joined: Sat Mar 16, 2019 11:35 am
Posts: 4
FOTIS wrote:
Change the scope out

Changed the scope over to my Ruger M77 Compact and shot a box of cheap 150gr Federal Soft Points. Only had one box for it and was a little pressed for time so the target below was the best 3 shot group after getting it close to being dead on.

Going to head back to the range on Sunday to get closer to dead on and then go for groups. In the meantime, I’m inclined to think that the scope is not the issue.
***EDIT*** added pictures of both rifles so that I could get opinions on scope mount differences.


Attachments:
3C912004-C977-4012-9291-A9FB984F81E2.jpeg
3C912004-C977-4012-9291-A9FB984F81E2.jpeg [ 2.09 MiB | Viewed 90 times ]
CA7AB51C-A152-4AFB-9856-6B46644216EF.jpeg
CA7AB51C-A152-4AFB-9856-6B46644216EF.jpeg [ 2.15 MiB | Viewed 90 times ]
9521F1F1-A363-4EB5-B7CF-5E1CE2F41458.jpeg
9521F1F1-A363-4EB5-B7CF-5E1CE2F41458.jpeg [ 2.86 MiB | Viewed 97 times ]
Top
Offline Profile  
Reply with quote  
 Post subject: Re: New Nosler 26 not grouping well
PostPosted: Thu Apr 11, 2019 7:02 pm 
User avatar

Joined: Thu Mar 01, 2007 4:10 pm
Posts: 5443
Location: British Columbia
It does look like the scope is doing well and your mounts look good too. Any updates with the new Accubond factory loads?

_________________
Saving the world one 35 Whelen at a time :)


Top
Offline Profile  
Reply with quote  
 Post subject: Re: New Nosler 26 not grouping well
PostPosted: Tue Apr 23, 2019 8:59 pm 

Joined: Sat Mar 16, 2019 11:35 am
Posts: 4
gerry wrote:
It does look like the scope is doing well and your mounts look good too. Any updates with the new Accubond factory loads?


Was finally able to find a box of 142gr Accubond LR and took it to the range today. Put about 1/2 a box through it and the groups did not improve at all. I brought along my .308 just to make sure the issue wasn’t me and the targets below are the best I could do in each gun. The first picture is my best group with my .308 and the other picture is the best I could do with my Nosler.

I sent my contact at Nosler an email this afternoon outlining what I had done and sent pictures of the targets. I’ve let them now that I want to return the rifle so they can figure out what’s up with it and I’m waiting to hear back from them. I’m hopeful that they can fix it as I really enjoy shooting the gun.


Attachments:
7DBA5E57-093F-445D-9CC7-D7FAF92E56A5.jpeg
7DBA5E57-093F-445D-9CC7-D7FAF92E56A5.jpeg [ 2.11 MiB | Viewed 5 times ]
0D91FA47-2AF2-4C40-A900-944E5771A6A6.jpeg
0D91FA47-2AF2-4C40-A900-944E5771A6A6.jpeg [ 1.96 MiB | Viewed 5 times ]
Top
Offline Profile  
Reply with quote  
 Post subject: Re: New Nosler 26 not grouping well
PostPosted: Tue Apr 23, 2019 9:13 pm 
User avatar

Joined: Thu Mar 01, 2007 4:10 pm
Posts: 5443
Location: British Columbia
Doesn't look good at all, I'm sure they will take care of things for you. That group with the 308 looks good though.

_________________
Saving the world one 35 Whelen at a time :)


Top
Offline Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ]  Moderators: JD338, NOSLER, FOTIS, NoslerV, Nosler4

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

This forum is:

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net