Notice: This site is not mobile friendly, we recommend you download tapatalk for a mobile friendly experience of our forum.

It is currently Fri Nov 15, 2019 11:00 am

Shop Nosler

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: QuickLOAD Help Pls - 35 Whelen AI and PP 2000-MR, CFE 223
PostPosted: Thu Nov 07, 2019 10:00 pm 

Joined: Wed Jan 13, 2016 10:51 am
Posts: 493
Location: Colbert, WA
Based on the latest Speer and Sierra Data, this is supposed to be THE powders for the Whelen. Anyone have time to run this combo for me?

75.5 grains of H2O
22" barrel
250 Speer Hotcore
3.375" OAL
57250 PSI

Thanks in advance.


Last edited by 5shot on Sun Nov 10, 2019 10:49 am, edited 2 times in total.

Top
Offline Profile  
Reply with quote  
 Post subject: Re: QuickLOAD - 35 Whelen AI and Power Pro 2000-MR
PostPosted: Fri Nov 08, 2019 9:25 am 

Joined: Sun Aug 19, 2012 6:44 am
Posts: 1808
Location: Sandy, Utah
At least ask for 65K! ha I ran my WAI about 72K, come to find out, lol.


Top
Offline Profile  
Reply with quote  
 Post subject: Re: QuickLOAD - 35 Whelen AI and Power Pro 2000-MR
PostPosted: Fri Nov 08, 2019 10:12 am 

Joined: Wed Jan 13, 2016 10:51 am
Posts: 493
Location: Colbert, WA
HAHAHA...

I have QL info for other powders at 57250, so I am looking to see an apples to apples comparison. If it looks like the stuff I'll go track some down, otherwise I'll stick to RL17.


Top
Offline Profile  
Reply with quote  
 Post subject: Re: QuickLOAD - 35 Whelen AI and Power Pro 2000-MR
PostPosted: Fri Nov 08, 2019 4:43 pm 
User avatar

Joined: Mon Mar 11, 2013 6:02 am
Posts: 6484
Location: East Coast
I looked at PP 2000 but could never find any to try when I was developing loads for my 35 Whelen AI and settled on CFE 223 at 62K psi and it was like shooting a laser.
Mine is a rebored M 70 24" barrel 1-12 twist with a long throat so I could use the full length of the magazine.
It worked so good I sold my M700 35 Whelen since I couldn't get no where near the velocity and performance out of it.


Top
Offline Profile  
Reply with quote  
 Post subject: Re: QuickLOAD - 35 Whelen AI and Power Pro 2000-MR
PostPosted: Fri Nov 08, 2019 6:55 pm 

Joined: Wed Jan 13, 2016 10:51 am
Posts: 493
Location: Colbert, WA
truck driver wrote:
I looked at PP 2000 but could never find any to try when I was developing loads for my 35 Whelen AI and settled on CFE 223 at 62K psi and it was like shooting a laser.
Mine is a rebored M 70 24" barrel 1-12 twist with a long throat so I could use the full length of the magazine.
It worked so good I sold my M700 35 Whelen since I couldn't get no where near the velocity and performance out of it.


According to the Speer data, CFE 223 is right behind PP200MR, so I will certainly give it a try if I can't find the other. I don't have info on it either, other than Speer.


Top
Offline Profile  
Reply with quote  
 Post subject: Re: QuickLOAD - 35 Whelen AI and Power Pro 2000-MR
PostPosted: Fri Nov 08, 2019 8:13 pm 
User avatar

Joined: Mon Mar 11, 2013 6:02 am
Posts: 6484
Location: East Coast
5shot wrote:
truck driver wrote:
I looked at PP 2000 but could never find any to try when I was developing loads for my 35 Whelen AI and settled on CFE 223 at 62K psi and it was like shooting a laser.
Mine is a rebored M 70 24" barrel 1-12 twist with a long throat so I could use the full length of the magazine.
It worked so good I sold my M700 35 Whelen since I couldn't get no where near the velocity and performance out of it.


According to the Speer data, CFE 223 is right behind PP200MR, so I will certainly give it a try if I can't find the other. I don't have info on it either, other than Speer.

Get some one to run you a QL powder run for chart. That will show you each powder in order from best to worse.
That's how I found CFE 223, it is a ball powder and gives good case fill. It is also a copper eraser and leaves a black coating in the bore but doesn't seem to effect accuracy.


Top
Offline Profile  
Reply with quote  
 Post subject: Re: QuickLOAD - 35 Whelen AI and Power Pro 2000-MR, CFE 223
PostPosted: Sun Nov 10, 2019 10:15 am 

Joined: Wed Jan 13, 2016 10:51 am
Posts: 493
Location: Colbert, WA
Bump for the weekend.


Top
Offline Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ]  Moderators: JD338, NOSLER, FOTIS, NoslerV, Nosler4

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: CatskillCrawler, Divernhunter, MSN [Bot] and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

This forum is:

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net