460 WBY and 30-378 WBY

A couple of previews~ :mrgreen: :mrgreen:

5h15wwn.jpg



460rl17.jpg
 
You should feel it!!!! :shock: :shock: :shock: :shock:
 
Fotis you sure can get those big weatherby’s too shoot! Excellent marksmanship on your part! The thought of recoil from that 460 just makes my teeth hurt lol.


Sent from my iPhone using Tapatalk
 
Fotis, those are awesome! Great load development and fantastic shooting.

Dan
 
Thank you all for your support.
 
Good work Fotis. I had a chance to try my 460 last week and found QL load to be off on this one to. For the 500gr Nosler Part. Norma brass seated at 3.730", I started at 107grs. of RL17 and went to 113grs. The 107gr. and 108gr. my Magnetospeed didn't read but rest it did after an adjustment:
109gr - 2495fps
110gr - 2516fps
111gr - 2545fps
112gr - 2557fps
113gr - 2577fps.
After everything looked good I loaded up 1 at 114 , 115 , 116 to try yet.
For the 300gr. RN BTs I loaded BL-C2 at 120gr. to 124gr. at 3.379" it yield 2988 to 3051fps. Again everything looked good so I loaded some more at 125 - 127 to see if I can get to 3100fps. I know these were designed for the 45/70 speed by they are way more pleasant to shoot over the 500gr Part.
Your 30-378 is a good shooter mine has been always a MOA shooter. The barrel is getting tired and I'm debating what to do with it. Right now it's hooked on RL33.
By the way your Blog page is very interesting and keep up the good work on it. (y)
I did pick up and modified that bore guild you mentioned and works , thanks.
 
What is you load with RL33 thinking about using some
 
Back
Top