Browning BAR 270 wsm powder

DarkMoose

Beginner
Dec 19, 2016
31
1
I tried the imr4350 and I cant get a 4 shoot groop better than 1.5 moa and sometime worst. I think try RL17 or 19.

Some have good result with in a BAR

Bullet AccuBond 140gr

The best I get was between 58.8 abd 59gr of Imr4350

Thank
 
For WSMs, RL17 has always been a good performer for me.
 
Looking back at previous work, I've had excellent success with RL19 and RL17. More recently, with 140 grain bullets, I've had very promising loads with H100V and H1000, as well.
 
You might also try IMR 4451. Have had good results loading for my Dad's 270 WSM, 60.5 grains with Barnes 129gr LR-X.

Sent from my XT1585 using Tapatalk
 
DrMike":3l23io82 said:
Looking back at previous work, I've had excellent success with RL19 and RL17. More recently, with 140 grain bullets, I've had very promising loads with H100V and H1000, as well.


How much you load it with h1000 ? I already have some here for my 300wm ?
 
DarkMoose":17g70kq1 said:
DrMike":17g70kq1 said:
Looking back at previous work, I've had excellent success with RL19 and RL17. More recently, with 140 grain bullets, I've had very promising loads with H100V and H1000, as well.


How much you load it with h1000 ? I already have some here for my 300wm ?

Shooting the 140 grain PT, I charged with 72.5 grains of H1000. That charge gave me excellent velocities and accuracy. I see that I focused more heavily on H 100V, however in multiple tests with 140 grain bullets. RL19 still gave me excellent accuracy with Sierra 140 grain HPBT, however. Ultimately, I settled on the 130 grain E-Tip charged with RL17. That load has accounted for moose, elk, mule deer, etc.
 
Back
Top