Recent content by 280SWE

  1. 2

    AccuBond Test Data

    Nice test with .338RUM and AB bullets :lol: :lol: How much did the diffrent bullets penetrate and what muzzel velocity?
  2. 2

    8x64S and Nosler Accubond

    A better picture of my rifle
  3. 2

    7mm mauser, 150gr Nosler BT ( powder wt. rec)

    My 7x57 like AA4350 and the faster powder Norma 203-B with bullets from 140grs - 150grs. So try out the IMR4350, I can´t go wrong :wink:
  4. 2

    8MM JDJ information or advice.

    Have no information. But when I look at the 375 JDJ cases and compare with 8x57JS cases are they very close. So proberly you can use 8x57JS loads??
  5. 2

    180grs bullets in 8x64S

    Hi, Some more info about my 8x64S Brenneke and 180grs bullets. Have find out that Norma 203-B is the powder that best gives accurancy and velocity. Have tried the follow bullets in 8mm: * Nosler BallisticTip 180grs * Remington SP 185grs * Barnes TSX 180grs * Laupa Naturalis 180grs I used S&B...
  6. 2

    8x64S and Nosler Accubond

    Anyone who hunt with the twinnbrother 8mm-06?? Experiance of loading 8mm-06 would also be of great intrest. Will soon start to try the Barnes TSX 180grs also, time to try unlead bullets to have a good hunting load for 2008 when proberly the lead will be banned for hunting in Sweden.
  7. 2

    8x64S and Nosler Accubond

    First game with 8mm 200grs Accubond. A roedeer The bullet worked very fine and was gently at the short distance, around 40yds. After the hit the deer run 10yds before it gave up. Now looking forward to see how the combination works for big game?
  8. 2

    What Calibers Are You Loading For?

    Now days I load: 7x57 Mauser .280 Remington 8x64S Brenneke In the past: 6.5x55 Swedish .222 Remington .270 Winchester 9,3x62 Mauser
  9. 2

    magnum primers vs. large rifle primers

    In the new "Norma Reloading Manual" they use Winschester magnum LR primer to all calibers. Here can you see some of the loadings from the new book: http://www.norma.cc/sida/eng/index.html
  10. 2

    Recommended 175 gr. Partition load using H4350?

    Use the same OAL for the powder and a startload for IMR4350 will be god for a startlaod with H4350, this two powder are very close.
  11. 2

    8x64S and Nosler Accubond

    Have done some more shooting and the AB shine with Accurate 4350.
  12. 2

    7x64 loads

    Hi, To 7x64 you can use starting loads for 280Rem for 7x64, take a look at my .280Rem webpage for loads. Click at "Fabriksladdningar 1" or/and "Fabriksladdningar 2" factoryloads from bullets / powder manufactoryes. But the C.O.L are not useful for 7x64, you have to do your own messure for the...
  13. 2

    Where are 140 7mm accubonds?

    140 Accubonds works great in 7x57, see my earlier topic: http://www.noslerreloading.com/phpbb2/v ... .php?t=991
  14. 2

    8x64S and Nosler Accubond

    Done some bullets test. Shoot the 8mm Accubond in wet newspapper at 2620fps from 10yds. Holds together real fine and penetrate around 23 inch. Nosler Accubond in the middle, left Laupa Naturalis 180grs and right Norma Oryx 196grs.
  15. 2

    Wrong B.C for Nosler bullets?

    Okey, Thanks for the info. So .479 B.C sounds realistic, I will use that B.C in my calculations.
Back
Top