Recent content by HeathSexton

I really like mine

I’ve never ran a rod and patch down them. I have two rifles that are stamped 9 and neither will shoot the 75hpbt so I use 55-68gr in them and my 8 twist gets fed 75’s and down.

Mine are probably like me, a little slow………

Hpbt, after trying them in the 9’s I’ve never tried the eld in my 9’s. I tried about 3/4 of a box hpbt with different powders in my 9’s. Never had a keyhole but never had a group under 2”. Same bullets shoot great from my 8’s.

68/69gr hpbt match are the longest my 9’s will turn accurately. 75’s don’t keyhole but 2-3” groups are as good as they’ll go.

I use the Sinclair small and large rifle https://www.brownells.com/reloading/case-cleaning-prep/primer-pocket-flash-hole/carbide-primer-pocket-uniformers/?sku=749003710

I run a pocket cutter through just about all new brass. I bought 250 pieces of 6.5 Grendel Hornady brass and my rounds wouldn’t chamber the primers were so high. After cutting them they are fine.

The old papaw express is very versatile.

My 20” ctr shoots 140gr+ bullets fantastic.

Yep, that simple.

I anneal every firing A cordless drill A socket A propane torch A 5 Mississippi count No need to drop into water

I’ve had 0 luck getting the Scirocco to fly from mine. The 90 tac-x is interesting I will admit. I’ve seen enough big hogs killed with the 108 Hornady eldm from 60-100yds from a 6 Creedmoor that I’ll have my Howa 6arc loaded with those in the fall. Another bullet I have on hand is the...

I’ve shot the 160’s in my 350 legend. No kills yet but very accurate bullets and not fussy at all.

A 5-7 Mississippi count works for me

A friend is using a bolt gun and Varget with the 105 hpbt. It’s definitely not a speed demon but he had 6 shots under 3” at 600yds the last time he took it for a drive. He’s getting 2600 from an 18” bolt with the 105 and 25.7grs of Varget. If you have any available I’d look at it and...