IdahoCTD's latest activity

  • I
    IdahoCTD replied to the thread Powder for 300 Weatherby with 180 grain bullets.
    I'd look at H-1000, Retumbo, N565, or N570. I wouldnt believe those fill ratios either. Quickloads is not great at that with the Rums...
  • I
    IdahoCTD replied to the thread Follow-up to Douglas Barrels discussion 07/14/26.
    Good to hear Don. I wish the whole industry acted like that.
  • I
    IdahoCTD replied to the thread Dialing vs Holdover.
    I totally agree with xphunter on the turrets as well. Mechanical parts wear out and Leupolds arent known for durable scopes, at least in...
  • I
    IdahoCTD replied to the thread Dialing vs Holdover.
    I got the Amplus scopes when they were on sale just below 1k in price. At their current price I'd probably buy a used Nightforce or VX6.
  • I
    IdahoCTD replied to the thread Semi Custom Rifles.
    A full custom doesnt need to take a long time to build or cost 5k. With prefit or Remage type barrels a person can put one together...
  • I
    IdahoCTD replied to the thread Dialing vs Holdover.
    Inside of 400 I generally dont mess with hold over lines either if I need to shoot fast With a 200yd zero my 300wsm drops about 6.6 and...
  • I
    IdahoCTD replied to the thread Semi Custom Rifles.
    I would go custom over a semi custom. The price isnt much different and you generally get a better product. Prefit barrels on custom...
  • I
    IdahoCTD replied to the thread Dialing vs Holdover.
    i just mounted one of my kids Leica Amplus 6 3-18×44's on a 7prc with a Defiance Classic action and a Krieger barrel. I'm in the middle...
  • I
    IdahoCTD replied to the thread Dialing vs Holdover.
    I personally like to use crosshairs because its fasters and you dont have to worry about where your dial is if you get multiple chances...
  • I
    IdahoCTD replied to the thread ADG vs Petersen Brass.
    Where did you see Petersons seconds brass? I havent seen that.
  • I
    IdahoCTD replied to the thread 6mm GT.
    Alpha makes 6gt brass and I'm pretty Lapua does as well.
  • I
    IdahoCTD replied to the thread Got my new plates..
    My new plate is HNTNFUL
  • I
    IdahoCTD replied to the thread Chamber grooves caused by .277 Fury.
    Nitriding is a very thin surface treatment so I wouldnt sweat it for cracking, not to mention the highest pressure is encased mostly by...
  • I
    IdahoCTD replied to the thread Chamber grooves caused by .277 Fury.
    The different expansion rates of steel and brass could explain the gas leakage. I said it before but.....steel cases dont give like...
  • I
    IdahoCTD replied to the thread Need help with damaged Rem 722 action.
    Lug set back is possible. If that happens you could have excessive headspace. You could also have lug galling and scarring on the bolt...
Show older items
AMMUNITIONAmmunition BULLETSBullets BRASSBrass FirearmsFirearms GearGear
Back
Top