IdahoCTD's latest activity
-
IIdahoCTD replied to the thread 100,000 PSI?.Higher psi also means heavier parts/thicker materials to sustain the pressure. That defeats some of the benefits of shorter barrels and...
-
IIdahoCTD replied to the thread MATCHMASTER POWDER DISPENSER.It has 2 stages, a coarse stage that stops 3 grains or so short, that is adjustable, and then fine trickles from there. The speed of...
-
IIdahoCTD replied to the thread Talk to me about VihtaVuori.I looked back at some N565 loads with 147 Hornady eld-m's in a 6.5PRC. 55.5grs with Peterson brass averaged 2903fps with a ES of 3.9fps...
-
IIdahoCTD replied to the thread ES/SD contributing variables.If you suspect its neck tension then you can buy a bushing die like the Redding type S or turn the necks on your brass. I generally turn...
-
IIdahoCTD replied to the thread Talk to me about VihtaVuori.N565 and H1000 produced nearly identical velocities with the same loads in a 6.5PRC when I tested them. I still prefer R-26 in a 6.5PRC...
-
IIdahoCTD replied to the thread Scope Mounting Question.I do it much like Ridge Runner but I build a clamp on level holder that goes on the barrel because I use Talley's alot versus rails. Its...
-
IIdahoCTD replied to the thread Best Tasting Animal?.I'd just settle for spot prawns. We use to catch a bunch off of Vancouver Island.
-
IIdahoCTD replied to the thread Best Tasting Animal?.I've had Dall and Bighorn and both were good.
-
IIdahoCTD replied to the thread Best Tasting Animal?.Sheep is the best followed closely by moose and then elk.
-
IIdahoCTD replied to the thread 100,000 PSI?.The biggest problem with steel based cases is they are not forgiving like brass. Much of the same as nickle coated cases. In a dirty...
-
IIdahoCTD replied to the thread 2026 Rifle Plans.Dont believe everything PTG says. I bought 4 "blueprinted" actions, including 1 307, and 3 were further out then a factory Remington...
