Joe C.'s latest activity
-
-
I appreciate this detail. This is what i was hoping for when i made the post and a few have provided that. I used this data as a...
-
Joe C. replied to the thread Loading .270 without the rifle.57 grains of IMR4831 with a 130gr NBT has been the accuracy load for 3 different 270’s I’ve owned through the years. It’s a nice load to...
-
be careful with your case sizing . if the case is just a little tight you'll have a hard time pumping the action closed . it's a...
-
Joe C. reacted to wvbuckbuster's post in the thread Reloading for the Remington 760 in 270 with
Like.
I've reloaded for 308,30-06 and 35 Rem in Rem Mod 760s using a full length die without any problems. Not to mention couple of semi autos. -
Great rifle 760 in 270 win Take a good look at IMR 4064 @ 49.5 with 130 grain Nosler Partition or Speer Grand Slam But those 130gr...
-
Joe C. replied to the thread Chrony repair.Check eBay. I got a new Magnetospeed V3 for $99. Shop for deals where you can.
-
I don't disagree at all. This means i would need to bring the rifle to me here in PA, or my reloading down to my Dad in TX. I know...
-
Joe C. replied to the thread Loading .270 without the rifle.You have a lot of room to work with from 53.2 grains of N160. About 5 grains worth. What was your velocity with the 130gr Accubond, as...
-
I'd wait for the rifle . I'd be worried about making ammo and having to pull it apart . making ammo is fun , pulling it apart , not so...
-
Factory match ammo usually produces very good results in a wide range of rifles - without having been worked up for each one...
-
Joe C. replied to the thread 100,000 PSI?.We are already at the point where most bullets don’t hold up to presently attainable velocities. Everything changes.
-
Joe C. replied to the thread 100,000 PSI?.It’s entirely possible that they weren’t designed as being immediately reloadable. If it’s not reloadable the factory controls supply...
-
Higher psi also means heavier parts/thicker materials to sustain the pressure. That defeats some of the benefits of shorter barrels and...
-
The video doesn’t mention about any effect on suppressors. Maybe wrong, but I think 100k psi in something like the Backcountry will be...
