LRP's latest activity
-
LI bet you’ll find that the IK21 brass has an undersized flash hole.
-
LLRP replied to the thread .223 decapping issue.The "IK21" headstamp found on some brass casings is an international headstamp code for Igman, an ammunition manufacturer based in...
-
LLRP replied to the thread .223 decapping issue.@ everyone. Thanks for the help. I have found that they are under sized flash holes made in a foreign company. Go figure. Thanks for the...
-
LMakes me wonder if these are military rounds & the primers are 'Berdan' type with 2 flash holes ??? I've seen resizing cases with these...
-
LMighty Armory decapping dies work well for me, use for decapping lots and lots of crimped primer brass. 308 and 223 brass, once fred...
-
LNo Idea on why the breakage. A smaller flash hole would I think. still allow the decapping pin to push out that primer and enlarge the...
-
Lfill the case 2/3 full of oil, set it in the shellholder on a solid surface,, get a wooden dowl that will slide down the case neck, tap...
-
LThe red is nothing but a sealer. Not familiar with that brass but it's probably military and the primer is crimped. Remove the crimp.
-
LBelow are two Remington .223 cartridges. The left has no issues decapping primers. The right will break decapping pin every time. I have...
-
