Recent content by nanuk

  1. N

    What a surprise with my 7MM-08

    Wow, as a boy from Saskatchewan, I can tell you our bucks would have NO PROBLEM scaling that wall of snow.... But I'd hate to have to drag one UP that wall!
  2. N

    Velocity-Pressure...When to Stop?

    I like to load up to where the gun opens upon firing, or blows apart, then drop down 2.5% :P~
  3. N

    Heavy Bullet 357 and 44 296 loads

    I have a 280gr 0.360" mould that has been HP'd and should drop a 235-240gr bullet. in my 357, I hope to push that to about 1600fps, and if cast soft, should be an awesome bullet for bush hunting.
  4. N

    Am I looking at incipient case head separation ?

    First, from the picture, the "Ring" is far to high up the case. Look farther down, where the colour changes about 1/4" above the base, THAT is where the brass stretches and separates Then you post THIS: Now, WHY would you full size NEW brass? New brass is already at the minimum most times...
  5. N

    BULLET DROP FOR 270 WIN?

    When using a ballistics calculator, remember to include your two shot group size into the calculation. in other words, when you see the number for 100 yd trajectory, ADD 1/2 your group size. So, if you have a 2MOA rifle, you would add 1" at the 100 yd range, 2 inches at the 200 yds and so on...
Back
Top