nosler06's latest activity

  • nosler06
    nosler06 reacted to salmonchaser's post in the thread Protecting Dies with Like Like.
    I just use a light spray of REM Oil. They typically don’t seem to need much but some of the case lubricants are water based. I also had...
  • nosler06
    nosler06 replied to the thread New To Me 30-06 Loads.
    Im trying to figure out which is the OAL that would be best to use to make length ladder loads. Would you use the full length...
  • nosler06
    nosler06 replied to the thread New To Me 30-06 Loads.
    Well trying to get back at it after a dryer belt breaking and a dishwasher fill valve broke and clean up that mess. My digital calipers...
  • nosler06
    nosler06 reacted to Alaska's post in the thread New To Me 30-06 Loads with Like Like.
    Actually 56.0 makes a great load with 180gr and 57.5 with 165gr in WW brass in Win 70 XTR 30-06.
  • nosler06
    nosler06 reacted to longrangehunter's post in the thread New To Me 30-06 Loads with Like Like.
    Stick with the 55.5 grain load and tweak it for seating depth, but that one is closer to what you want to see. I Always prefer to see...
  • nosler06
    nosler06 replied to the thread New To Me 30-06 Loads.
    I just checked the OAL of my case with the bullet seating the lands and found that it is 4.410". Backing and starting .020" from the...
  • nosler06
    nosler06 reacted to DrMike's post in the thread Back to the range with 30-06 and RL26 with Like Like.
    Very impressive, indeed. I believe that load will work. It has everything--velocity, accuracy and a great bullet. What's not to like.
  • nosler06
    nosler06 reacted to EastTNHunter's post in the thread Back to the range with 30-06 and RL26 with Like Like.
    2875fps out of a 22” barrel with 180 Accubonds is more than impressive. I’m going to load up some more to test out in different...
  • nosler06
    nosler06 reacted to PJGunner's post in the thread New To Me 30-06 Loads with Like Like.
    I haven't tried the 165 gr. Partition on my 30-06 yet. I've been running the 165 gr. Accubond over 56.0 gr. W760, WLR primer and...
  • nosler06
    nosler06 replied to the thread New To Me 30-06 Loads.
    I agree. Almost every time I've done ladder loads for my two 06s and a 308 I get the same type of pattern as well. It's bizarre.
  • nosler06
    nosler06 reacted to AFG270's post in the thread New To Me 30-06 Loads with Like Like.
    Either of those look good, a little seating depth adjustment should tighten them right up.
  • nosler06
    nosler06 replied to the thread New To Me 30-06 Loads.
    I have over my years pushed into compressed loads and pushed the envelope lots. I guess im trying to stay more on the safe side. I used...
  • nosler06
    nosler06 reacted to RL338's post in the thread New To Me 30-06 Loads with Like Like.
    55.5 looks good with a little seating adjustment. Are able to try 57.5 or are you seeing pressure?
  • nosler06
    nosler06 reacted to SJB358's post in the thread New To Me 30-06 Loads with Like Like.
    I’m with the others. Try shortening up your load .010 or maybe a skosh more and you’ll have all the groups looking good.
  • nosler06
    nosler06 reacted to JD338's post in the thread New To Me 30-06 Loads with Like Like.
    Looking good. I'd focus on the 55.5 gr load and start seating bullets deeper in .05" increments. This should tighten up your group. JD338
Show older items
AMMUNITIONAmmunition BULLETSBullets BRASSBrass FirearmsFirearms GearGear
Back
Top