Ralt71's latest activity
-
RYuppers! Beat me to it Scotty. Guy
-
RI was going to type out a response but Jorey’s was spot on. I’m another user of slow powders in the 25-06, H1000, 7828, rl25 and 26...
-
RI would work up at 0.5gr versus 0.002gr until I start see pressure at 0.020” off. Others have givens sound advice.
-
RWelcome to the forum. As suggested, IMR4350 or IMR4831 should get you the desired results with a 100 gr bullet. Maybe show the results...
-
RBefore I spent much time and components chasing seating depth I would change powder to some of the ones suggested above. I know he...
-
RNot often you hear of guys having issues with a 25/06. I've had several over the years and they were always very accurate and easy to...
-
R"I originally was loading Sierra Gameking 117gr. bullets. I have since tried Speer HPBT 100gr. Better velocity, no consistency though."...
-
RRalt71 replied to the thread Reloading Help 25-06.How far off the lands do you set your loads up?
-
RA consistent load I have used was a 100 grain Nosler BT and IMR 4831. IMR 4350 works equally well.
-
RRalt71 replied to the thread Reloading Help 25-06.Father In Laws can be, but the Mother In Laws... that's where the faint of heart drop out haha!! I honestly have never went further...
-
RFather in laws can be a PIA :) I generally start with .02 off the lands and work out from there. I have three rifles that like Ballistic...
-
RRalt71 replied to the thread Reloading Help 25-06.Thank you for the quick response. I don't disagree on the H1000, but it was what he wanted to use because he has so much of it. I've...
-
RWelcome to the forum. There are a number of very squared away 25/06 guys here. I’m sure they’ll have better information than me. Don’t...
-
RHello, This is my first post, although I have read through a lot of threads on this forum over the last couple weeks. I have been...
