Ralt71's latest activity
-
I’ve got a Burstfire annealer and run my brass through it every time before I size my brass. I should have started annealing my brass... -
I loaded my first rounds back in 1954. it wasn't until the mid1970s that I tired annealing my brass. One of the riflesI load for isa...
-
Just trying to recall the simple annealing process used by some prior to annealing machines...IIRC Place your cases in a cake pan with...
-
Ralt71 reacted to Blkram's post in the thread I need help with reloading a 280 Remington with 19 in barrel with
Like.
All of my 280 Rems over the years have had 22" barrels. I ran 160 and 162 gr bullets in my first rifle (Browning A Bolt) with IMR 4350... -
Ralt71 replied to the thread To anneal or not?.I started reloading by watching my Pap and doing it with him in the late 90's. I started reloading on my own in the early 2000's. Pap...
-
Kinda old news by now. Weatherby has released their own muzzleloader based on the 307. For anyone interested here’s their web page...
-
Ralt71 replied to the thread To anneal or not?.I anneal after each firing for most of my guns and when I'm working with someone else on their loads. It makes a difference for sure...
-
I also shoot a 338-06 but not improved. I use Lapua 30-06 brass, neck it to 358 and size it down to fit snug on the first firing. No...
-
My son uses 30-06 brass necked up to 338-06. I'd recommend annealing before necking up. Will help with longer case life in regard to the...
-
Ralt71 reacted to jimbires's post in the thread How much of the neck do you bushing size? with Like.
we all know brass moves , or we would not have to trim our cases . donuts are formed from thicker shoulder brass moving into neck...
-
Thank you sir.
