SJB358's latest activity

  • S
    SJB358 reacted to Firebird24's post in the thread New Swift Z Bullet with Like Like.
    Mr. Hober covers his new “zephyr” Z bullet in this podcast for those interested. I will not share any opinions, just some information...
  • S
    SJB358 reacted to Hunter26's post in the thread New Swift Z Bullet with Like Like.
    Buddy got some and has them shooting pretty well in his Bergara 7mm PRC with Grand. Hes planning to deer hunt with them in the fall. Im...
  • S
    SJB358 replied to the thread To anneal or not?.
    Don’t let annealing get too complicated. Once you do a handful you’ll get the feeling for it. I started with a socket on a drill with a...
  • S
    SJB358 reacted to phil's post in the thread To anneal or not? with Like Like.
    It has benefits, one is case life if you are splitting necks and shoulders. More consistent neck tension for better long range results...
  • S
    SJB358 reacted to RL338's post in the thread To anneal or not? with Like Like.
    I anneal after each firing to keep everything consistent for me. Brass work hardens from the firing and sizing of it and at some point...
  • S
    SJB358 replied to the thread Brass selection.
    Bingo. Lets you form cases without stretching them from the first firing. Minimizes case wear and fatigue as well. Doing that and...
  • S
    SJB358 replied to the thread Help: Need .338 WM reduced loads.
    If you want reduced loads for the 338 Win Mag and 200/210 PTs look at RL15, Varget, N540, 4064, etc. load the 210 up to about 2700-2800...
  • S
    SJB358 replied to the thread Brass selection.
    I also shoot a 338-06 but not improved. I use Lapua 30-06 brass, neck it to 358 and size it down to fit snug on the first firing. No...
  • S
    SJB358 reacted to Blkram's post in the thread .280AI New Rifle Build - Barrel Twist & Free Bore Question with Like Like.
    With the bullets and weights mentioned, not sure you would need more freebore...but if you were to play with the heavier Bergers, you...
  • S
    SJB358 replied to the thread .280AI New Rifle Build - Barrel Twist & Free Bore Question.
    I tend to set my chamber up for the longest/sleekest nose bullet I’m going to use to fit at magazine length. You’re probably using a...
  • S
    SJB358 replied to the thread 6mm arc bullets.
    I’m shooting the 109 ELD M’s at 2800 in my 22” 6 ARC. I can’t see any reason to wanna change it up. Accuracy has been awesome and it is...
  • S
    SJB358 reacted to JD338's post in the thread 257 Roberts revisited with Like Like.
    Love the 257 Roberts. I have a Remington 700 Classic chambered in the 257 Bob and settled on the Nosler 115 gr BT. It’s a little hammer...
  • S
    SJB358 reacted to PJGunner's post in the thread 257 Roberts revisited with Like Like.
    Interesting. I have two rifles chambered to the .257 Roberts. The Ruger #1 B came with several boxes of the now long gone Norma 100 gr...
  • S
    SJB358 reacted to TackDriver284's post in the thread Die to press alignment with Like Like.
    Good that you brought it up, measured 6 fired .308 Lapua cases, they all measured .0005" or less. Mostly barely any movement on the dial...
  • S
    SJB358 replied to the thread The last of a bygone era.
    You aren’t kidding.
Show older items
AMMUNITIONAmmunition BULLETSBullets BRASSBrass FirearmsFirearms GearGear
Back
Top