Search results

I don't know but Brandy is staring you down ! Lol

Thank you for your hard work! Keep it up.

I grew up with wood heat. My dad and me cut the wood and I spit it amd carried it in after school. I moved out and went to college ... came home to visit the first winter and there was a LP gas tank in the back yard! Guess I was cheap labor, lol.

This is a 'universal load' if there ever was one. It's worked in a couple of 300wm barrels for me. Depending on the brand of brass ( case capacity) it could be 74.5 to 75.5 gr of Reloder 22. If RL22 isn't available try 79.5 to 80.5gr of H1000 with 180gr bullets.

Athlon Midas BTR gen 2. This is my 2nd one. They're flawless and extremely clear to my eyes all the way to max power.

I carry a canopy tent. I love being the only guy ( dumbass) out shooting in the rain, lol. Sometimes I think I have a problem.

I was playing with cheap Hornady 155gr and Ar-Comp today, might have struck gold. Shot at 200 yards from a bull bag, orange dot is 3/4". 2773 fps 34 ES 9 sd This is by far the most accurate lr308 I've ever owned. My first one took 4 barrels to get this good.

I wonder, Is Vista making 300% more than 2 1/2 years ago or are the retailers?

26" barrel?

Thanks, what is your loads and barrel length for those? Sounds like the 7 wby could best 7mm RM by a good margin with the same pressures even though they're about the same capacity. I should have mentioned, there's no danger of mixing brass because I dont have a 270wby right now.

I've had two 7mm Remington magnums, and have a 28 nosler, and 7mm wsm currently. My 28 Nosler is pushing 175gr Bergers at 3190. My 7wsm is shooting 150gr fast! ( I don't want to say how fast). my past 7mm Rems accuracy loads with 162 to 168gr was always right at 3000 fps. They could go faster...

Yes. Gray is what you want.

I agree. I used to use Devcon 10110 now I'm all MarineTex. I think it's more user friendly, it stays where you put it and it doesn't go bad in a year like Devcon.

I sighted her in at 200 yards. I think this is terrific for absolutely no load development at all. I guessed at a mid pressure load for Reloder 15. The imr4064 really shot well though. Not one malfunction. Gas setting is on number two. These dots are 3/4". Edit, these are pulled 175 smk from...

She's set up and ready for the range tomorrow. The melonite oxide was still apparent in the chamber and bore, so I used Flitz and JB paste to polish the chamber and JB scrubbed the barrel. After cleaning is looks outstanding in the borescope.

https://autotrickler.com/pages/autotrickler-v4

https://www.brownells.com/gun-parts/rifle-parts/rifle-magazine-parts/model-70-extended-magazine-box/ I definitely wouldn't shorten the Mighty RUM. I'd install a Wyatt's extended mag box. If you are going to neuter a 300 rum just get a 30 Nosler.

I drive a lot of magnum rifles. Almost all have brakes, which is the worst shock for scope fasteners. I've had more than one sheared base screw before I decided to only wear stress free bedded quality one piece bases and lapped scope rings. If you ever lap a set of scope rings you'll be...

Yeah, I have built a couple all on DPMS gen 1 upper and lowers. My current 6mm CM is 12lb. 3oz. unloaded! That's with a carbon fiber handguard! It is however a tack driver.

Ridged Teslong. I have a flexible one for looking at my small bore pipe weld root passes at work. ;) Both connect to my phone or tablet.