Search results

Yes

Turn it on, hit calibrate. It zeros. I put my weight on and it says the same weight that's on the weight.

That's the load data I used just to be safe. It makes no sence to me at all.

My case capacity with h20 is 73g with my nosler brass

No clue on velocity, didn't take the chrono. And the depth of these are seated shorter then the 150ablr's were. My measurement with the hornady ogive is 2800 the 150 bullets were 2830

Ok so I loaded up 4 different loads with 150ablr's. 60 thru 61 grains of 7828ssc. Blew one primer with the 61 grain load. Stick hard to lift bolt. All loads show shinny spot on brass and ejector marks, but rl26 didn't show any of these problems .

Are these powders temp stable?

What's a good load for the 25-06 shooting 115 ballistic tips?

Oh no worries. I'm givin the 7828 a shot now. I have seated my bullets deeper with it also. I hope a bigger jump will work.

Well I got some load with 7828ssc . Some at 61.3 with 2 different seating depths and 63.3 with 3 different seating depths. Hopefully weather permitting the next day or two I can go shoot. Thanks again all!!! The gunsmith sure has my chamber deep. I think he did it for Bergers for the long bullets

What is the max psi for the 280ai? And does anyone shoot the 7828ssc out of there's? I have 2 pounds of it and the stuff is everywhere to buy.

0 Ack Imp Bullet : .284, 150, Nosler Accubond LR 58734 G7 Useable Case Capaci: 68.100 grain H2O = 4.422 cm³ Cartridge O.A.L. L6: 3.506 inch = 89.05 mm Barrel Length : 24.0 inch = 609.6 mm Powder : Alliant Reloder-26 ?

Earlier they had it at 68.100 h20

I need a ql for that. I only have 7828ssc

Reloader17?

Thank you for your work and time gentleman. I agree I need another powder. I'm gonna look for rl 23 or mrp. I'll still try the load you suggested also. Again I thank all of you for your time and help. My hat is off to you all.

I agree! It will be worth it. Glad to have some people that are willing to help instead of being asses like other sites. I really appreciate all of there help

That measurement is 10thou from my lands.

Well truckdriver at least your just reading it and it's not your rifle. I'm on a two day headache.

Where am I sitting pressure wise at 3190fps