Search results

I guess I don't know what you are referring "burn-rate b" to. The "burn rate factor Ba" is editable in my version. If you are talking about "factor b", that is changed by using the dragging the curve within the propellant editing window. Looks like you figured it out though.

It’s editable... you have to click on the button next to the powder drop down to edit it, or you can use the edit powder button in the toolbar. Looks like a powder jug. Sent from my iPhone using Tapatalk

I finally settled on 100gr btips and after this season I'll resume exploring the 110 accubonds. This rifle (x-bolt) seems to like 3150 fps. I'm not after top speed since 3150 fps is certainly plenty to do the job. I really didn't see it before but comparing speeds between btips and the...

I go by this list- http://www.accurateshooter.com/technica ... y-formula/ Sent from my iPhone using Tapatalk

Case capacity, barrel length and rifling are a few others a user can change to provide accurate estimates. Sent from my iPhone using Tapatalk

The more I thought about it, the mattress pump is a way better deal and provides a lot more cfm’s especially at the bench. I’ll Dave the chamber chiller for trips. I’d also cool it from the muzzle end to the chamber to get the countercurrent effect working. Throw that vinyl tubing into some...

Neat combo [emoji1303] Glad I’m not the only one that has those darn rounds that just don’t fit into the steady progression we want to get when getting velocities. Do you reshoot those or leave them be? Sent from my iPhone using Tapatalk

Yoda, I made a lot of lapua 30-06 to 25-06 about three years ago and the tension compared to my nosler 25-06 batch takes a lot of work to pull the bullet. I should have turned them down another .001. I’ve been working on the 110 in my 06 too. Went to test my previous load and it went from...

Shucks, I’m running a 16gb sandisk that was retired from my dslr camera. I got a response back for my suggestions. I’ll have to share them when I get home. Sent from my iPhone using Tapatalk

When I measured the primers, Federals averaged + .006 more in diameter larger than Winchester’s. Sent from my iPhone using Tapatalk

After a few trips with the Lab radar I have to say it has potential. There is a learning curve with it so I'd recommend taking some blow away ammo to use while setting it up and getting all the settings right so it tracks your projectile. I'd recommend getting a battery pack to help power the...

I put this chart together a few years ago sourced from my measurements and some from online. Which primers are you using? Sent from my iPhone using Tapatalk

I’m working on my 25-06 too. Shoots 100gr very well, .5 moa at 200. Still working on heavier bullets. After two years, I need to redo my other bullet I want to use. Trying to find info on the 110gr accubond accuracy ability, loads and grouping pics returned more champions of 115-117gr bullets...

Get the velocity and try to match it Sent from my iPhone using Tapatalk

26” rem 700 SPS did really well with 44.5gr w748, 150gr btip, 2.860. Chopped the barrel to 22” And now it’s 43.3gr w748, 150gr btip, ill check on the oal. Sent from my iPhone using Tapatalk

Thank you to hoyt-6190 for the measurements- and to Gun nut for offering. Here is the line for the 130gr Game Changer ".264, 130, Sierra Game Changer 4330 ","130","1.370","5.00","6.71","3.58","G1","2",".264",".510",".510","","","","","","","","","","25" To add it into QL, you can click...

Could you do me a favor and measure the large and small radius of the boat tail? I’m creating a QL bullet profile for it and need those two numbers to finish it. Sent from my iPhone using Tapatalk

Visit a furniture store and ask them for some silica packets- they are pretty good sized packets, maybe 1/2-3/4 of a pound each. You can heat them in the oven to dry them out to reuse them periodically. I Clp the metal and store the rifle In a silicone infused rifle sock. I keep my...

that is a start- I need to get these measurements for the tapered part of the bullet: Small Diameter of taper (bottom of bullet) Large Diameter of taper (bullet shank diameter)

Yes- sorry I should clarify it’s the cap screws they recommended be 15-16. I should be getting some trigger time this weekend- (labradar arrives tomorrow[emoji1303]) and will be testing the .260 on a more solid Caldwell rock solid front rest than before. Sent from my iPhone using Tapatalk