Search results

  1. E

    90 grain Accubond

    It was leaving the barrel at around 3450 ft/s
  2. E

    90 grain Accubond

    Took a pronghorn antelope at 323 yards back in October with this bullet fired out of a 240 Weatherby. The bullet went through the front left shoulder and lodged in the front right (breaking it). It retained almost 80% of its original weight. Then I really asked a lot from this bullet when I...
  3. E

    85 gr RDF 5.56mm Load

    Try the twist calculator on Berger's website. I have an 8 twist 22-6mm and shows that it will work. I am at 4400 ft asl though too. I would also suggest measuring your twist and be sure it is what it says it is (a little quicker or slower can make a difference).
  4. E

    70 Grain RDF Testing

    18" 8 twist Bear Creek Arsenal (Mid length gas) 223 Wylde Winchester 223 brass (new) CCI 450 70 Grain RDF There doesn't seem to be a lot of info out there, so here is what I have done so far with my own load development . All loads are CBTO 1.795" (or about 2.248" OAL), which is .010" off the...
  5. E

    Load help, 70 gr RDF in a .223

    18" 8 twist Bear Creek Arsenal (Mid length gas) 223 Wylde Winchester 223 brass (new) CCI 450 70 Grain RDF There doesn't seem to be a lot of info out there, so here is what I have done so far with my own load development . All loads are CBTO 1.795" (or about 2.248" OAL), which is .010" off the...
  6. E

    85 gr RDF 5.56mm Load

    These will be flying out of my 22-6mm shortly
Back
Top