Search results

I'd be awful curious to know what the velocity difference is w/ no change in groups other than elevation.

How did it group at the higher temp?

It does look like a "too much lube" dent when resizing, however those are normally ironed out when fired. You need to determine when the dents occur, sizing or chambering. If it's the chamber I'm surprised you didn't feel it during chambering. If it's the die I'm surprised it didn't smooth out...

I crimp all my hunting ammo. I have proven it to myself that it makes my ammo more consistent.

Excellent Guy... I too use a sling on my 375 w/ barrel band. In fact if the rifle has sling attachments I don't head out w/o a sling. Usually a Latigo.

"The real fix is to have +P loading data for the 358win which would boost the velocity 100 to 200fps. The other is bullets oridginaly design for the 35rem. Many use the 200gr CLRN at 2500fps, 356win guys swear by the 220gr speer, and now the 200gr FXT is proving to work in the 358win. Again just...

The only downside to to the 220gr Speer is its relatively low BC, and that only has any real effect beyond 200yds. In my way of thinking it's not the trajectory that is the real issue but the impact velocity and to a lesser degree TOF. I like a minimum of 1800fps to ensure reliable expansion...

If you change bullet weight w/ the 358 I can assure you that you will have to rezero. You won't see "explosive" expansion at 358 speeds w/ any weight bullet w/ the exception of 357 pistol bullets. RN/FN cup & core bullets designed for the 35Rem will give you the most rapid expansion. Bullets not...

with a sling?

Many will drop in and fit fine. You have to measure if it will fit any particular frame. If it is longer it can be fitted. If it's too short it's easier to keep looking. Ruger won't fit a non original cylinder. Rugerforum.com is the site you want for value and likely buyers.

Nothing to add about the powder, but I do crimp all my hunting loads. I've proven it enough times to myself that my ammo is more consistent that way. I understand the arguments against it but my experience differs. Especially considering the conditions hunting ammo may have to endure.

If you have an issue w/someone at Ruger that you don't feel has been properly resolved, or any other reason for that matter, use the link provided on their website "Contact the CEO". He (Mike Fifer) does read and respond to these communications. Air it out and you'll feel better either way after...

Interesting... Let us know how they group. I have never tried Superformance. I am at the stage of simplifying vice exploring new powders. In fact all I load now in my 338WM is I4350, 180s to 250s. 100fps won't change my ways. Cutting groups in half might do it though... :grin: the extra...

Hard to argue with any of that. I never really understood the significance of retained weight percentage... if you've recovered it it likely penetrated enough. (y)

Over the years I have found that Ruger customer service is what I measure all others against. It really is that good in so many ways.

The Lee FCD can change the pressure curve and it stands to reason it can effect peak pressure. Remember your sample size is very small. You are already noting a couple of "looser" primer pockets and an increase in effort to open the bolt. Any sign of high pressure should be heeded. IMO you are...

I have done first shot groups for years with all my hunting rifles. Usually from a sitting position. The bench is for chronographing and load workups. It will convince you on the value of a good hunting sling and to have your rifle set up to use it.

I use the N-100 peep on my Ruger International with the large aperture. The N-100G was not available when i bought mine. The "G" looks like it may be a better setup with the aperture between the ears although I've never had an issue with mine. The 100 comes with two apertures. The "G"only comes...

"More important is to instinctively aim within your midrange trajectory and know your drops beyond your zero for as far out as you are going to shoot." The only way to know your drops and true zero is to shoot them... from field positions I would add.

A std 30-06 180gr load 200yd zero is about 2" hi at 100yds. 3" hi puts your zero out to about 235-240yds, and about 5" down at 300 vice about 8". For me it depends on what and where I'm hunting. Also depends on where you prefer to shoot them. If the intent is a hi shoulder shot 3" hi is a bit...