Search results

  1. boomer68

    Range Day - Tikka T3 270Win

    150 PT 53grs H4831sc Nosler brass WLR 3.320" Another good load, but probably a bit slower.
  2. boomer68

    Range Day - Tikka T3 270Win

    Didn't run it over the chrono DrMike. Going to load up some more and play with seating depth and chrono them.
  3. boomer68

    Range Day - Tikka T3 270Win

    Initial load looks promising 130 PT 59grs H4831sc Nosler brass WLR 3.320"
  4. boomer68

    Primer Tool

    RCBS universal priming tool for me.
  5. boomer68

    270 WIN OCL with 140 Partitions

    I am using 3.320"
  6. boomer68

    QL request - 270 Win

    Just loaded up some using H4831sc and 130, 140 and 150 PT Might as well try each lol
  7. boomer68

    QL request - 270 Win

    Exactly. It just plain works.
  8. boomer68

    QL request - 270 Win

    Many thanks! I am going to start with H4831 and see how things go. Picked up some new Nosler brass as well.
  9. boomer68

    QL request - 270 Win

    Could someone please run QL on the following bullets? 130gr AB 130gr BT Thanks!
  10. boomer68

    Range Day - 7mm RM

    Darkhorse: That's what I'm thinking as well. Seating depth is the key. I have a Hornady OAL tool, but have to pick up a 7RM case.
  11. boomer68

    Range Day - 7mm RM

    I would like to try RL22 but it's difficult to find up here. RL23 is easier to get. Oh, and I got some 140 & 160 AB as well as 160 PT to try. Sent from my iPad using Tapatalk
  12. boomer68

    Range Day - 7mm RM

    Just an update... Tried H1000 with the 140gr TTSX COL 3.230" W-W case WLRM
  13. boomer68

    Nosler brass questions

    Just curious. Who makes the brass? I was thinking Norma.
  14. boomer68

    Lyman Borescope

    Just picked one of these up and pretty neat.
  15. boomer68

    QL request

    Thank you DrMike!
  16. boomer68

    QL request

    Could someone please run optimum powders for 7mm RM and the 160 AB and 160 TSX and 140 TTSX? :grin:
  17. boomer68

    Ruining A Good Load

    I ran into similar issues with a batch of H4831 when loading for a 270 Win. Velocity was 100-150fps below book numbers. Same barrel length too.
  18. boomer68

    Range Day - 7mm RM

    I took those loads directly from the Barnes manual. It listed 63grs as max, so that's why I stopped there. Didn't have any ejection issues. Going to try some 160 AB and see how they perform. Been close to 30yrs since loading for the 7RM. Last powder I used was H870 and Hornady 162 BTSP lol
  19. boomer68

    Range Day - 7mm RM

    Got out to the range to start my load development and here are the preliminary results. Rifle is a Weatherby Mk V Accumark RC. Load: Barnes 160gr TSX RL25 W-W brass CCI-250 3.240" OAL Started at 59grs, then 61 (2 shots) and last target was 63 Should I try H-1000? Play with seating...
  20. boomer68

    Accumark RC

    The scope has the standard plex. I believe it is called the Nikoplex. As far as the barrel, it is hand lapped and button rifled. Possibly a Criteron??
Back
Top