Search results

No sir, it's all in north Indiana. This week I'm in SW Tennessee hunting but I didn't bring it.

The barrel actually floated during trial fitting pre-bedding. I left two spots of the wood un touched when I ground out for the epoxy, I (installed 3/8 stainless steel tubing for pilars while I was at it.) I wrapped three wraps of electrical tape around the barrel to center it and to insure...

When I was hunting as kid I used to look up at my Dad carrying his 700 30-06, he was my hero back then. My chores were to do brass prep so we could load when he got home from work. When he passed away my brother got his rifle, cut the stock down and rebarrel it for his young kids. A noble thing...

That's the thing, I'm not going to use it. I don't want to work up a load with something that won't last the barrel life. I have 7977, 4955, and 8133. Wish I knew someone who needs them and close enough to trade.

Wish you weren't 3/4 the way across America I'd trade something for some 8133. 8133 came out in the middle of the barrel life of my first 28 Nosler barrel. That barrel is gone and I have pounds left over.

This is the very reason I've stayed clear of every PRC cartridge. Unless you chamber a barrel in an Alex Wheeler reamer your going to have problems. Makes the 7mm Remington magnum look pretty good.

The only option right now is get some ADG 300wsm brass. Neck down and neck turn. Outstanding brass but all that work is a pain.

I spray super77 adhesive on cardboard with cheap tablecloth paper adhered to it. Then put 3/4 orange labels outlined with sharpie and 1" stencil. I'm pretty particular about my targets, but I'm also cheap. Shows up really good at 200 yards.

Dry fire. Dry fire. Dry fire.

This is the single best piece of equipment I've ever owned for reloading. I have the V3. I wish I could have bought one 20 years ago.

My experience with Reloder 25 is it is slightly slower burning than Rl26 in bigger cases. I have two barrels now that love it. 30 Nolser with 200gr Berger Hybrid and 300wm with Berger 185 Hybrid. The 30 Nolser is about 98% case fill. The 300wm is compressed at about 105% but this barrel...

Are you sure they're going thirty eight thousand fps? I've loaded 130ttsx in 300wsm at 3500 fps with rl15 in a 24" barrel. I'm sure 300wm could top 3450 with out overpressure. I have been wanting loading them in one of my 300wm for a long time, just haven't got around to it. I'd probably...

Maybe coincidence but my 7wsm loves Berger 150gr and Reloder 23 with gm210m primers. However I bought a bunch of 8lb jugs of rl23 when it was $28 a pound, not $60 plus shipping, tax and hazmat lol.

" buy what you can when you can" is the very reason. I'm fortunate enough to have slowly acquired many many years of components when prices were down because demand was down.

I only use standard rifle primers in all my WSM cartridges. Mostly GM210M. I recently substituted 9 1/2m primers in place of 210M primers in a 300 wm. Lost 65 fps. In most primer tests involving 9 1/2 M primers I believe they are one of the mildest primers magnum or not. My results were in...

Retumbo is THE powder for 264 wm. I believe I'm at about 96 to 98% case fill with Retumbo and 140gr vld .010 off the lands.

That's about what they should be. In my mind LRP should be $25, not $100.

I just want everyone to realize that retail theft isn't absorbed by the retailer, that cost is handed down to the hard working, paying customers! Not just at that location but also in your local Cabelas. I simply can not believe that ammunition was allowed to be stolen! What does anyone think...

"Officials believe the New Castle County location was targeted due to its "hands-off approach to shoplifting." This is the problem, past cultures would cut off a hand for theft. Not anymore, criminals are coddled and protected. Fear of offending certain "people ".