Search results

Thanks for the reply. I’m hoping to keep my shots 300 and under. I’ll try the accubonds after I try the partitions. I’m hoping a summer of groundhog hunting gets me ready. Thanks again.

I got some load info on this combination. Should end up around 2900 FPS. Thanks.

Hello, I have a browning long range hunter in 6.5 Creedmoor with a 26” barrel. My son and I have a mule deer hunt planned for October and I would like to use a 125 grain partition. I’ve had very good results with RE16 and a 130 grain ELDM. Does anyone have any results using RE16 and a 125...

Thank you sir. It looks like RE26 might Be a good selection for that bullet. I was using H 4831 with good results. The issue is it’s hard to leave well enough alone. Again thank you. One more question, what does the red colored language translate in your replies. That not Cyrillic is it? If so...

First of all thank you for your time and help. If you can I would like a quick load result for a 150 gr ELDX with RE 26 for my 7mm WSM. Now that Hornady is putting out brass I can start reloading again for this. Thank you very much.

I finally got to shoot and 42.8 shot the best. Right around 5/8”. No pressure signs at all. I’m .020 off the lands so I start tinkering with seating depth. Thanks for the replies.

I talked to Hornady and they said they haven’t tested it yet. Called Alliant and they said they tested it with the 129 grain SST. With 44 grains being the max. They also said to start at 40 grains and work up. I believe 2830 was the velocity they stated at max. Thanks again.

I just loaded 10 at 42.5 grains, 5 at 42.8 and 5 at 43.1. I’ll post the results after Sunday when I get to shoot. I got some data off the Alliant site which posts max at 44 grains for a 130 grain VLD. Hopefully it works out. Thanks again.

Hello, has anyone tried this combination yet. I read that 16 has great potential in a creedmoor. Thank you for your replies.

If I remember correctly the H1000 load was around 2940 fps. I didn't chrono the RE 33 load. I'm hoping to shoot Sunday. I'll post the results Thanks again.

It was with the 208 gr Amax. 107 grains of Re 33 with a COL of 3.750. The accurate load is 208 grain Amax with 99 grains oh H1000. At 3.750 also. Thanks again. Have a great day.

Hello again. I loaded up some 208 gr Amax bullets over the weekend and shot them on Sunday afternoon. Much to my dismay they pretty much hovered around 2-1/2" at 100 yards. Shot a different load that was previously pretty accurate in my rifle and was also pretty bad. I have a Zeiss conquest on...

I e-mailed Berger and they replied that due to recent changes in protocol they no longer give unpublished data through email. I called the provided number and didn't get in touch with anyone. I'm sure they are pretty busy. I'll try again later. Thanks

Is anyone using the 230 gr. Berger in this rifle with Re33? Thanks again

Thanks again. I really appreciate the info you posted. As soon as it gets a little nicer here I'll get out shooting and I'll post my results. Tony

Thank you for your replies. Do you think Re 33 is too slow for this combo? I also have H1000. Thanks again.

Hello. I'm hoping to get some data for a 208 gr Amax in my 30-378 using Re33. It's a stock Accumark. I contacted Alliant and they replied they didn't test that combo. Hornady also. I have data for the 212 gr. ELDX with Re 33 and I'm just curious if I can use that data to start. Thank you for...