Search results

Well, it turned out amazing. I was really suprised at how well it turned out. The hardest part was cleaning the clay out of the action and figuring out how bolt stop spring went so I could put the trigger back on. I know, I know it is worthless without pics. I took pics I just have to have...

Well, I took the leep of faith this afternoon! I spent all week prepping the stock, action, etc with clay release agent probably a good seven or eight hours worth of prep work. The bedding part took about 15 minutes, now I just wait to see my stunning succes or miserable failure?? I took...

My stock is the brown laminate so I was thinking the pillar bedding may not be needed for the laminate I can crank the screws down pretty good and you can't squeeze the stock. I assume you mean that wood needs to be removed from both sides of recoil lug and tape only on muzzle side? I guess...

I decided to go ahead and bed the rifle while I was at it. Only questions I have after reading the instructions is they say to remove stock material at all the bedding surfaces to allow the compound to be thicker, I haven't read about anyone doing that is that necessary. Has anyone done there...

I noticed in my nosler book the 300 wsm are tested with 26" barrels which I don't think you can even buy on a factory rifle and 300 win listed with 24" which is also fairly uncommon. Coincedence?

Exactly my point; the difference between a hunter and a shooter! My other point is a 30-06 can be affective at long ranges as well as long as you have done your part with wind and hold over and know your distances. People always say as long as you don't want to shoot over 300 the 30-06 is...

I have a sako 85 greywolf in 30-06. It is a wonderful rifle but I keep looking at my nosler book figures at the 300 win, 300 wsm, 270 win, 270 wsm, fill in the cartridge name here. The one thing I can't convince myself of is that any of these cartridges will do something my 30-06 cannot. Yes...

Does anyone have any experience having a 30-06 rechambered to a 308 Norma Mag. Any good experiences with the 308 Norma and how it compares to 300 win or 300 H&H??

I will check but a dollar bill should fit through easily. What I meant about the trigger inlet is I didn't know if I should remove some of the inlet on the back side to be sure the recoil of the gun causes the action/barrel to exert the force on the recoil lug recess and not at the trigger. My...

I have a remington 700 LSS mtn I have decided to remove the pressure point. I used the old deep well socket and sand paper and it came out really slick. The question is how much clearance is adequate? I took a regular sheet of paper and folded once or two thicknesses passes easily around the...

I had terrific luck with 4831sc and the 130 accubond at 2.80 with my 700 Mtn in .260. I totally agree very difficult to find the magic load.

I have always wanted one too. I think I am going to pull the trigger. This guy by my house has an internet business and a pretty good price on them new. $495 for them blued and walnut. http://www.sportingarms.com/results.asp ... D+FIREARMS

I too have one of the M700 Mtn Rifles in .260 with a 22" barrel. I have reloading for it for awhile but it was real particular. On the good side it shot everything at 1.25" no matter reloads, factory, everything but nothing would do better. Finally I found a load for the 130 Accubond and it...

I finally found a good load that shows promise in my .260 remington after a lot of trial and error. Remington 700 LSS Mtn Rifle 22" barrel 1 in 9 twist 130 grain Accubond CCI BR Primer 2.800 COL H4831sc 48 grains Came out to 3 shots at .679 Average Velocity 2775 This should be close to max if...

Has anyone used the Pact XP professional chronograph. I used a buddy of mines this weekend a chrony. It would give good readings but it was very basic looking for something with memory, etc. like the Pact. Can anyone recommend this one or another one with similar features??

right there with ya yote but I only have two settings on mine. Almost tight enough and Snapped the head off the bolt!!! :x :lol: I am thinking of getting the wheeler because of the above, heard some good things about it plus it is cheap or I mean economical.

I know down here in Ft. Worth the Cabelas is stacked with lines every day selling guns no matter what time a day I go in there. The gun shows have also been pretty crazy the last few months. To quote Yogi Bera "no one goes there anymore because they are too crowded". I talked to a couple of...

BOTH! In fact better get them both now to avoid the line on November 5th. :lol: :o :( :x :cry:

I am using the hex style and it usually measures within 3 to 4 thousandths. I guess I was under the impression you use a comparator to get exact measurements. Because I can get within that range without a comparator, so then why would you use one? Maybe just for lead tip bullets when the tips...

Before I reloaded some more ammo to double check. I went through everything again checking seating depth etc. This time not using the comparator because either I am not using it correctly or it seems to give some erratic measurements. Does this seem common or is there something wrong with the...