Search results

and got to take a walk, saw 3 bucks, could not resist. The 6.5 creed made short work of him

How do they do on deer?

have not and won't just mark it down to a lesson learned.

it is shorter,, starline trims their brass. but what gets me if the pressure is too high for starline brass, why is the shoulder still rounded?

Starline brass measures . 439, Hornady . 436

soon as time permits will measure them and let you know

check out the Arken SH4J 6x24x50 318.00 bucks delivered from Amazon, watch the tracking video on the amazon page. also a youtube video on a comparison with some other higher priced scopes...

I do not. the brass do fine with starting loads, but once you load a top level load every case fired is toast. Look at the shoulder on the right case, its still rounded, not as sharp as the hornady. That concerns me, the front end of the case is not fully formed but the casehead is expanded a bunch

left is a hornady factory load fired, reloaded, fired at least 1X, and resized, right is a starline new bass fired 1X and resized

was running 2732 fps at 29.5 from a 22" 7.5 twist Satern barrel. 108 factory loads run 2658 in mine

could't find hornady brass so ordered 200 rounds of ammo

29.5 gr of lever behind a 103 ELDX

6 ARC, pockets are tight, but casehead expansion is so much that there is a distinct ring above the rim at the bottom of the die. Hornady brass do fine. Also having a problem with SRP 6.5 creed but that is probably my ignorance, didn't know it takes a different firing pin in most AR10's

upper level loads ruining brass with 1 firing, same load in hornady is fine.

with starline brass? not a good experience for me at all

How do you like it? just got a deal on a slightly used one, trying too figure out the features.

if you run a larger expander in one case you don't have to fire them first

Awe, she'll probably let ya gut and drag :ROFLMAO::ROFLMAO::ROFLMAO:

I do the same except I run the next size up expander ball into the case, instead of painting it. case life of belted cases is greatly improved if you set your die so the cartridge will headspace not only on the belt but also the shoulder.

I suppose due to higher SAAMI pressures?