Search results

i don't as i don't use lead bullets.

congrats on the 10 year anniversary! i went off the rails and have 6 kids and going on 31 years the end of july. 4 have graduated hs and that leaves the twins (boys) to go. 3 more years and they'll graduate hs. i am so ready for that as i'm tired of the school district and i graduated...

i have 2# of 22 and possibly 2# of 17 if you want them! i also have 2# of 25 if someone want them! i haven't done any loads, so it'll be a waste on primers for doing load developments and having a max number of shots of 250. btw, what are your plans with the lrt cartridge(s) wise? the lrt i...

full power loads in handguns w/ non-lead/cast bullets

btw, i have yet to use any h4350. i do have some on hand tho.

i've read that about the 500 series powders on being barrel burners regardless of some being less temp sensitive/stable. i do have some 160 & 165 powders to try for my larger magnums and may try some in the 5.6prc & 7saum?

5 so far. G20, g40, s/w compact, s/w 5.6pc & xdm10. NO 1911/2011's for me, but I'm close to buying a ri ultra hc.

what weight was shot? from 50 yards to 100 i don't see much difference in drop using 135 to 155's in 4-6" barrels. kinda like my 357sig shooting 90-125's at 100 yards also. both are fairly flat. wednesday my velociradar comes in so i can finally check my handloads.

Whatcha need! I have around 300# of just rifle powders.....don't ask for any Alliant 16, 23 or 26.

i might as well

reduced recoil can be made in many forms! powder and bullet weights are the biggest 2 that WILL have a reduced effect. a lighter faster moving projectile will do this as a heavier bullet moving slower with the SAME m.e. has a reduced effect on recoil. faster burning powders that produce...

In the pre64 I used that combo in i decided after 2,500+ rounds thru it to not shoot it any more. I've got around 3# left and for my 2 other 264wm 's I'll be using other powders. I bought a post64 in '15 or '16 that only has 3 rounds down the pipe and 1 i built on a 110 action for the...

i haven't found any imr4831 anywhere in the last 2 years. it's been my go-to since '84 w/140sbt sierra's in 264wm. 61.3grs to be exact.

i have some 570 also along with 568, 565, 560, 555 & 550.

what are you using blue dot in? i don't reload shotgun, so i use it in a few pistol cartridges. when you can reload 500-700 rounds per # one thinks he'll never run out? i guess if they never make any more and you continue to use bb, then you will at some point. i only was able to obtain...

before so many alliant powders were becoming unavailable or less available alliant was going to introduce rl13. i never found any info on what cartridges it would be used in or if it were like 15.5,m 16, 23 & 26 type as a "more green" powder?

where the heck have you found 33 and bb on the shelf at? or do you mean your shelves

has anyone tried rs grand yet?

33, 19 and 10x (6-8# of each) are what i have the most in on alliant as 15, ar-comp, 17, 22 and 25 all have 2# or less left. i'm transitioning into vv powders since my favorite imr4831 is all but gone. probably saving the 17 for 308 and 7-08 and 22 and 25 for i'm not sure which cartridge(s)...

you have more will power than i do and glad for you! i'm about 5'9" and weighed 225 for decades. i've lost 35# due to pain keeping me from eating.............i'd rather be overweight than live the way i'm right now! i used to be able too workout when i had the time, but baling alfalfa...