Search results

I carry a canopy tent. I love being the only guy ( dumbass) out shooting in the rain, lol. Sometimes I think I have a problem.

I was playing with cheap Hornady 155gr and Ar-Comp today, might have struck gold. Shot at 200 yards from a bull bag, orange dot is 3/4". 2773 fps 34 ES 9 sd This is by far the most accurate lr308 I've ever owned. My first one took 4 barrels to get this good.

I wonder, Is Vista making 300% more than 2 1/2 years ago or are the retailers?

26" barrel?

Thanks, what is your loads and barrel length for those? Sounds like the 7 wby could best 7mm RM by a good margin with the same pressures even though they're about the same capacity. I should have mentioned, there's no danger of mixing brass because I dont have a 270wby right now.

I've had two 7mm Remington magnums, and have a 28 nosler, and 7mm wsm currently. My 28 Nosler is pushing 175gr Bergers at 3190. My 7wsm is shooting 150gr fast! ( I don't want to say how fast). my past 7mm Rems accuracy loads with 162 to 168gr was always right at 3000 fps. They could go faster...

Yes. Gray is what you want.

I agree. I used to use Devcon 10110 now I'm all MarineTex. I think it's more user friendly, it stays where you put it and it doesn't go bad in a year like Devcon.

I sighted her in at 200 yards. I think this is terrific for absolutely no load development at all. I guessed at a mid pressure load for Reloder 15. The imr4064 really shot well though. Not one malfunction. Gas setting is on number two. These dots are 3/4". Edit, these are pulled 175 smk from...

She's set up and ready for the range tomorrow. The melonite oxide was still apparent in the chamber and bore, so I used Flitz and JB paste to polish the chamber and JB scrubbed the barrel. After cleaning is looks outstanding in the borescope.

https://autotrickler.com/pages/autotrickler-v4

https://www.brownells.com/gun-parts/rifle-parts/rifle-magazine-parts/model-70-extended-magazine-box/ I definitely wouldn't shorten the Mighty RUM. I'd install a Wyatt's extended mag box. If you are going to neuter a 300 rum just get a 30 Nosler.

I drive a lot of magnum rifles. Almost all have brakes, which is the worst shock for scope fasteners. I've had more than one sheared base screw before I decided to only wear stress free bedded quality one piece bases and lapped scope rings. If you ever lap a set of scope rings you'll be...

Yeah, I have built a couple all on DPMS gen 1 upper and lowers. My current 6mm CM is 12lb. 3oz. unloaded! That's with a carbon fiber handguard! It is however a tack driver.

Ridged Teslong. I have a flexible one for looking at my small bore pipe weld root passes at work. ;) Both connect to my phone or tablet.

Yeah, I'm sure Remington isn't that organized, lol. https://saami.org/

My 300 RUMs absolutely do not have weatherby freebore. I'm seating. 020" off the lands. Almost all Weatherby cartridges freebore is .375". !!!! I think a couple have .285" or something.

https://www.oncefiredbrass.com/norma308win100ct.aspx I ordered a few hundred of these for the new SFAR. Kevin is a stand up guy.

How's your sfar shooting? My 20" SFAR will be here next week. I loaded the FGMM receipe 175gr SMK 41.7gr imr4064 and gm210m primers for break-in. My experience with ar10/ lr308 gas guns it will probably take a couple of hundred rounds to break in the barrel and mechanics. I have been reading...