Search results

Yes on the weight of the bullets. I did not weigh all of them but a few of them and measured them as well and they seem fine. I'm not sure how far of the lands I am now. Ioaded to an oal of 3.725. Corey

I probably have 500 rounds through the barrel. I would not think enough to burn it out. Corey

I started to test the scale thats a good idea thanks. Corey

Why would the reloading data be that far off? I had the same issue with RL 22 but loaded it in my son's 30-06 with no issues what so ever. I appreciate what you worked up here, I guess I'm having a hard time wrapping my head around it right now. I was really hoping to get 3000 fps or at least...

None taken. yes it hit 3000 fps when it should, according to the book been 2800 fps. I had a similar issues or the same one with RL22 using Winchester brass before. In fact ruined all my Winchester brass, hence I have new batch. I was pretty sure there was no oil i the chamber, in fact I...

I had posted a few weeks ago about pressure issues in my 7mag. Thought I had it figured out but went to the range today and first shot, not even a hot load stuck my bolt closed, blew the primer. All my pressure problems started when I changed lots of RL22, which I thought was my problem but I...

Well that's interesting now. I guess I need to look at what I'm doing a little bit closer, because as you wisely explained it does not add up. Thank you. Corey

I came up with up with 3.752. However that is the load that gives me issues. My notes from past loads that were not a problem were 3.740. This is pushing the bullet up until I feel it make contact, following the directions from the Hornady Bullet comparative. I don't feel anything until it...

160 grn accubonds is the bullet. I actually thought I was .040 off the lands but noticed I was .012 out from the year before. I changed powder lots at this time and thought that was the problem, and the only thing I changed. But looking at my notes I see that my seating depths are different...

How much H1000 are you loading for 160 grain accubonds? Corey

So I have some questions about pressure. I had some loads of RL22 in my 7mmrm that I thought was a bad batch of powder, but it turns out I'm an idiot. Thought I would get that out of the way. I found this out when I loaded some new loads with a different brand powder and on the beginning load...

Thanks for the help and replies. I guess I should try both powders I have and see which one does the best. Corey

Me too, just wanting to know what others have done with it. Corey

No I'm done trying the Rl22. I've tried the very minimum in the nosler book and still get pressure signs. I have 3.5 pounds of the stuff and I'm disappointed in it. I plan on calling to see if I have a bad lot or something. I can't see the swing being that big. That is why I want to try H1000...

Been a while since I've been on here. But those that are using H1000 what is your recipe, if you don't mind sharing. I finally found two pounds of it to try out yesterday. Corey

I'd love to try H-1000 but it's so hard to find. I did find some RL26 yesterday and I'm going to give that a try next week. My fingers are crossed. Corey

All great information. Thank you for the help. Corey

I guess I should clarify. I did drop down with the new lot of powder worked up to 62 grains and had to stop. Thought that was safe until it started showing pressure signs. Well I guess I'll see if I can find some RL26 and give it a try. I just can't believe there can be so much difference from...

I'm not so sure I want to stick with AA powders. I need the consistency. Corey

The hard part is finding them around my area. Corey