Search results

Don't plan on it but it seems to always happen!

depends on bullet jump, my 6.5 gibbs gains 120 fps with .030 jump over .010.

Yep, at 65 I'm more particular about where I hunt and where I shoot game, don't drag them far anymore, and downhill is highly preferred!

fill the case 2/3 full of oil, set it in the shellholder on a solid surface,, get a wooden dowl that will slide down the case neck, tap it with a hammer, the oil will push the primer out, then you can examine the pocket and flash hole. Is it possible that that brass is berdaned primed?only...

My mother years ago went into a gun shop and asked the guy behind behind the counter for collars for an RCBS flashhole deburing tool for her son (me) as a christmas gift. The gentleman asked her which caliber was he needing. She replied "he has one of everything"

American Tactical calvary, 3" chambers, screw in chokes, selective. extractors/ejectors, barrel selector...a nice shotgun for the price, they do run around 600 bucks.

This is factory loaded Cor-Bon 300 gr. 458 Socom using starline brass, most of the time it leaves 1/2 the brass in the chamber

hornady brass works fine, the case on the right is hornady loaded and fired 3X

hornady

congrats, well done!

just loaded up some 103 ELDX's with 29.2 gr of lever, won't handle the book max charge of 29.5, shoot 1 resize it and its now a belted case. Thats using new starline cases, hornady handles it fine. L2R once fired starline, once fired starline and resized, 3x loaded hornady.

Hasn't been here since oct. 5th, hope he is doing well

may your ES's and SD's be low throughout the holidays!

my 22" AR runs 108's 2725, thats hornady factory loads, shoots sub 1/2 moa if I do my part. have shot a couple deer with it, all does, the 2 I remember were the best and worst results. one at 70 yards that ran 30 yards and piled up and one at 304 yards that made it over 200 yards, both shot...

tried any H380?

My money goes to ARKEN, IMO better than NF at 1/3 the money.

once again, The partition is designed for the front lead core which is pure soft lead to fragment as the bullet penetrates. The harder rear core protected by the partition is designed to penetrate. On solid high velocity impacts if the partition ruptures, the bullet will fail, penetration stopss...

love my 10MM! congrats.

never had faith in the G7 BC, always figured it for myself. only bulllet I never had to tweak the BC on was the 139 gr lapua scenar.

the partition is not designed for 65% retention, the front end is designed to shed fragments,, while thee rear core protected by the H-mantle keeps penetrating. If the partition ruptures penetration ceases immediately. The accubond may hit solid bone,, become just a twisted mass of lead and...