Search results

I use; N570 in 300rum with 230gr Bergers, 27 Nosler with 140gr Nosler Ballistic Tips, N565 in 300wm with 200gr Hybrids, N550 in 308 win with 168gr smk, 6.5 Needmore with 140gr Custom Competition and I'm trying it in 277 Fury with 140gr Sierra Tipped Game Kings. N140 in 223AI with 73gr ELD...

Thank you if i find some on sale or maybe free hazmat I'll try a pound to see if my 300wm likes it.

Is Grand a good powder? Is it similar to Magnum? I have jug of Magnum left but i cant find any available. I wonder if Grand replaced it?

Unfortunately threads like this starts panic buying. Just bringing attention to the topic starts panic buying. I received the email. I believe American Reloading is a good family company but they also know good and well that people will start buying more if they read about shortages and price...

Ai chat bot is what responded.

Any personalized load calculation that should be available to h4895 is not there. 223 rem with 40 to 60 gr bullets, 308 winchester with 155gr, 277 fury with 130gr. Ive tried to find it in this program a hundred times, all other hodgdon powders are included but not h4895. Powders from hodgdon...

Yes I have a membership. All other Hodgdon powders are available. Just not H4895. I've tried but is there specific powder exclusion opinion that I dont see?? Do you see h4895 anywhere on any cartridge data list at all??

I joined for 277 Fury load calculations. There are some weird outputs. When entering my personal component parameters for 300rum and 230gr otm I got stupid low velocity predictions. Also h4895 is excluded from any information. I asked in the XXL reloading forum with no help.

I make my own CBTO gages from once fired brass for all my chambers. Especially wildcats, Ackley improved chambers and because the factory Hornady guages are short on headspace compared to my fired brass. The Hornady thread size is 5/16- 36. I size the case, drill and tap then ream the neck...

Retumbo, Retumbo or Retumbo whichever you have.

First range trip. Just sighting in the scope and breaking in the barrel. The bullets were slight damage pulls from de-milled ammo and the powder is pull down from de-milled ammo all from American Reloading. 140gr Berger classic hunter and Midwest powder MP 587 ( similar to Reloder 16). This...

26" breach to muzzle

Got my barrel in Thursday. Assembled the rifle tonight. It might be a few weeks until load testing.

I really didn't want to go this way, but I had a Ridgeline. Right out of the gate it would not chamber virgin Lapua brass ( the neck was too tight), when i called to tell them about it they said i voided the warranty by reloading. The recoil pad was different than advertised. The action was so...

Man look , I have actually seen reloder 23 and reloder 26 since I have seen 7828. It has been about SIX years since I've seen 7828. I dont know why. In my experience with rl22 and rl23 i have learned in fact reloder 23 is a bit faster burning than rl22 despite what Alliant says. However rl23...

Was this rifle brand new when you first got the initial BTO measurement? The lands and (thus measurement) will increase fast at first then stabilize at a slower rate of erosion for the next few hundred rounds. H1000 is going to be the best powder for low bore temperatures. Make absolutely sure...

Well, I'm not sure if it makes a big difference but these were ice-cream jugs, about 8 inches diameter.

The 180gr XTP and HAP have the same POI for me but... The terminal performance on water buckets are quite different.! The HAP went through five one gallon jugs and stopped inside the back of a five gallon jug. The XTP stopped inside the 2nd one gallon jug. All at 25 yards.

Tell me about your reflex sights. Which one do you like the best? I have a Sig Remeo and a Holosun. I like the Holosun way better.

Beautiful pistols there! I think i can see you've got Trijicon and Leupold reflex sights. Which one do you like the best?