Search results

With Hornady making 7 wsm brass that opens new window for my old flat top savage 7wsm, if anyone has time please run QL for me with RL 23. Thank You!!! 7WSM 140 Accubond 24" Barrel OAL 2.83 Fed GM215M primer Run with RL 23 please. I'm excited to build a load for this thing......

Could someone help me with a QL run for 6.5x47 Lapua? 129 LRAB 24" Barrel 2.8" OAL (will have to adjust this later)

Nosler brass for 7 Remington Magnum: In March 2015 purchased 100 Nosler brass, was excellent quality and weighed 215 grains. Also had some much older Norma brass that weighed 218 grains. I could load interchangeably either brass with no noticeable difference in speed or accuracy. In March 2016...

Would someone help me out with QL on 260 Rem 24" barrel & H4350. OAL I am starting with is 2.77 with 120 NBT.

I started last July trying to get a supply of 90 AB in .243! It has been a bust went thru long backorder that was supposed to be available in November, didn't happen. Then reordered 500 from both bullets.com and cabela AGAIN. Was ETA ship date of approx Feb 15, 2016. Just now got word from...

Can someone please run QL on 2 powders for me with in .243 Win with 20" barrel. Looking at predicted OBT's mostly to target velocity from. Run with H4350 & IMR4831 .243 Win 90gr Accubond COAL = 2.675" 20" Barrel I have searched a lot and only found QL data on 22 and 24" barrels. Thank you...

Anyone using H4350 with 90 AB in 243. Reason I ask is Nosler Load Data states 43.5 is max with IMR4350..... So i go to Hodgdon site and look at 90 grain bullet loads (think they use Speer SP)... But on their site they state max at 1.5 grain higher with H4350 (44.5gr) than with IMR4350...

Found what looks like could be an excellent load for a 20" barrel factory Remingtion 700 Mountain Rifle if any body has interest. Load is 39 grains AR Comp Fed 210 Nosler Brass 140 Hunting NBT OAL 2.77" Straight from Alliants 2015 Manual. First load tested in this gun. Did not get velocity but...

I am shooting 3400fps with 80 ttsx using 45.5gr H4350 from 20" barrel, any idea as to barrel time for this setup?

QL Request with known data, wondering just what pressures actually are predicted. 28 Nosler 180 Berger Hybrid seated .010 off Fired case H2O 102.1 grains OAL 3.707 Average Velocity at 3,137 (magento speed) 81 grains Retumbo Temp was at 70 degrees. 24" Barrel This should be interesting.

Opinions, thoughts?? Saw this over on Longrangehunting.com Seems several of the guys there are using this redneck method of tightening primer pockets successfully. https://www.youtube.com/watch?v=19XmgETCWOE Thread is here: http://www.longrangehunting.com/forums/ ... ow-152361/

Having tested both 4831's and RL 26 and still not as accurate as I would like I am thinking on MRP as I have 2lbs of it sitting here. Could someone run QL on this for me? Thank YOU Any help on speed to look for would help, thought on using RL 22 data but see a slight difference in VMD and speed...

Can somebody help out with QL for: 243 Win (Nosler Brass) Barnes 85 TSX Fed 210 Primer OAL 2.645 20" Barrel

Can someone who has adjusted the Ba on the RL 26 run QL for me for 7 WSM? RL26 140AB OAL 2.85" Fed 215gm primer 24" barrel

Don't own one of course but have some interest in data to help decision making. Pie in sky but has me thinking. Does anyone have enough info on the case dimensions to run a QL on the 28 Nosler with 180 grain berger match hunting vld?? Thinking OAL would be near 3.5"

This is 3rd trip with this load and it has been excellent so far. 280 AI 27" Brux Sendero barrel 215gm primer Once fired Nosler Brass 63.3 grains of RL 26 (case "feels/shakes" like probably over 97% full) 140AB .080 off lands OAL approx 3.33 Magento Speed velocities but groups tested with out...

If anybody can help with a Quickload for me it would be much appreciated. 140AB RL26 27" Barrel 280AI FED 215GM primer OAL 3.33

RL26 looking real promising in the 280AI gun. Gun is a Dan Glover built gun on Sendero frame all truing action, bolt etc. with 27" Sendero weight Brux 9 twist barrel. Load 62gr RL 26 Fed 215gm primer 150LRAB at .080 off lands Nosler 280AI once fired brass Avg MV 3175 es 15 smooth as butter...

After testing up to 73.5 grains in 7mmRM with decent accuracy across the load weights from 70 to 73.5 with the 140AB's here are some more notes that may help anybody using it. *Although no real visible pressure signs it was stretching primer pockets at about 72 to 72.5 grains (didn't realize...

Working up a load for 7mm Rem Mag with 140 AB. I started at 71 grains and moved up half a grain at a time until I reached Quickload predicted velocity. Not having any knowledge of this NEW powder I was careful to track how it reacted as it was put under load and track temps from 35 to 75...