Search results

I posted on a couple forums and the general consensus seems to be either use the two separately or buy lapua, nosler or Norma brass. I'm looking at having a couple different loads made up for this gun. Mainly one for steel plinking and a hunting load. I have enough to split the brands between...

I've been shooting some factory loads of Winchester and Remington thru my 30-06. I'm starting to accumulate some brass from each and have been using both in working up a couple loads. I'm looking to move to one brand of brass to get more consistency in my load development. Here are my 3 options...

Hi all, Does anyone have any experience loading the ABLR in a 30-06? I found a good deal for some 190s and am debating trying them out. I'm a little worried about my gun being able to stabilize that heavy of a bullet. I have a 1 in 11 inch twist barrel which is the minimum recommended per...

The cases were fired twice and neck sized between firings. I'm thinking it was a piece of debris that got lodged in the chamber. Got a chance to look down the chamber and its fairly dirty. This could be the culprit. Sent from my iPhone using Tapatalk

Looking for some 30 cal bullets for my 30-06. Looking for the below types but may be open to other offers. Strictly nosler though. - 190 ABLR - 180/165 partitions - 180/165 accubond - 168 etip Thanks Sent from my iPhone using Tapatalk

Thanks for all the quick responses gents. These were fired from a bolt gun. No idea what the velocities were. Case length is 2.484", which is .01" shorter than length listed in nosler load data I believe. The cases are Remington core lokts that were factory crimped. The case necks were pretty...

Hi guys/gals, I'm working up a load in my 30-06 for a 168gr nosler CC. I'm using RL22 and per the nosler load data started at the lowest charge at 59gr. I loaded 5 cartridges in half grain increments to 61gr. No pressure signs that I could tell except for maybe this. Is this a sign of pressure...