Search results

Have this nasty damage on my otherwise pristine Anchutez. Would you live with it or seek repair?

Ever run into a set without one? I just did, they were an old orange box set of Lyman dies off eBay. Sent them back & have my preferred brand a clean set of Durachrome Carbides on the way

Was shooting yesterday about 1/2 thru my 50 rounds. Got the soft POP and about zero recoil. Case ejected, I think, can't quite remember the sequence. But on later inspection the empty case had some unburnt powder grains & a bullet stuck in the bore just forward of the chamber. Load was following...

This is the older style cap with stylized gold L on the cover. FRONT CAP ONLY for a 40mm objective Leupold. Our Alumina® Flip-Back™ lens covers feature powerful neodymium magnets to hold them securely closed, and triple O-ring seals to provide maximum protection from the elements. Constructed...

I have about 10 years worth of this magazine all in excellent condition, some still in the plastic wrapper. Anyone interested? Here is an example this one is December 2009/January 2010 Volume 22 Issue 6 41

Have a favorite? I'm thinking of using a 200 grain LSWC to punch some X rings out New to the 45 ACP game

Just received 100 pc of this in 28 Nosler. Now do I start from scratch or take a proven load & begin there? I'd imagine the .5 MOA load I'm currently using that's 1.5 grain below the Nosler reloading books maximum load using Nosler brass would be safe in this, but unsure. If I drop 2.5 grains...

Has anyone noticed a different in the two? I'm currently running once fired factory brass in a 28 Nosler and am seeing a larger variance in empty case weight than I'd like. Also an issue with work hardened necks is cropping up after just the initial firing. I've never seen that one before. I...

Have one built on the model 48, it's Noslers Mountain Carbon. Tried a few shots with it just as it came & quickly decided I need some help with recoil management. 1st step was getting a brake, I went with a self timing design, a Salmon River Solutions TI Pro 4. Had the raw titanium finished...

Thinking about one for next Fall, anyone have some favorite loads? 41

Thinking about a carbon rifle for next year, one quite like the Nosler 48 Mountain. Will be hunting Mule deer Elk & Antelope here in Montana, the possibilities for a long shot are definitely in the mix, for me that would max out at 700 to 800 yards. I have a reliable LRHS 4.5-18 ×44 that I'll...

Clean used 3 die set has carbide sizer and taper crimp. Need $60 that includes shipping to your front door. Post, PM or email

QL request. 338 Remington Ultra Mag - Nosler brass - Nosler 250 grain Accubond - Federal 215 primer. Rifle is a stock Model 700 with the 26" stainless barrel. Please include Vihtavuori N 565 data if possible. Thanks! 41

Older metal can Dupont IMR 3031. Was in a display case with 5 other powders slim & tall glass bottles with cork stoppers. 41

Building a 338 RUM load for a hunting buddy. Starting components as follows. 250 grain Barnes LRX New Remington brass O.A.L. will be set at maximum 26" Barrel Federal 215 primer I'm thinking Allient's Reloder 33 will yield the highest velocity, but I'd like a look at the other useful...

Could someone please run QL on the following bullets? 130gr Barnes TTSX 160 Nosler Partition Thank you for your time. 41