Search results

Thanks, Joel - I always read your username as "Joe Elk Douglas". I might just work up to my planned velocity a little slower with the new powder can. It was a 2 grain jump to my next set is why I held off. On the primer note, do you think RL26 would be better served with a different primer in...

My primers started getting a little flat around 3110 fos yesterday. I was running low on my current jug of RL 26 so thought I'd transition to my new one, shot a couple low loads with the Chrono to get a baseline and it was like 15 fps slower so looking real good. But then I went to shot groups...

Pretty accurate prediction!

Thanks Scott, I'm hoping to hit and find good accuracy around 3100fps with my 22.4" barrel.

I have a couple questions, but more about using QuickLoad data in general. I believe SAAMI max PSI is 62,000 for the 25-06, yet I often see QL say "Near Maximum" over SAAMI pressure - is this just a setting for max PSI, and I'm sure I should just stick with not going over 62,000 no matter what...

Thanks DrMike!

Hi all, Could I bother anyone to do a QuickLoad for Reloder 26 110 AccuBond 25-06 Tikka T3X 22.4" barrell

Nice. I just got a couple more lbs of 26 so I'm going to go down that path. I have 100 TTSXs shooting lights out with 26 but want to try 120 Partitions and 110 accubonds before I settle on a bullet. Not opposed to Speer either just never tried them!

Thanks guys

Does anyone have a recipe for a 25-06 with Reloder 26 and a 120gr Nosler Partition?

What do you use for a seating die? Do you ever find you still need to do a full length resize - I thought I read you will eventually have to do this.

I have RCBS Full Length Resizing and Bullet seating dies for my 300 WSM. I have the same for my 25-06, but also picked up a Redding body die and the Lee Collet Neck Die, and have been happy with that setup. I still seat the bullet with the RCBS die. I was thinking about getting the Redding...

Thanks hodgeman I saw hogdon's max for the gmx too - 7.6 grains less! I really want to try some e-tips, but in the meantime I have a stock of TTSXs and H4350. Has anyone played with this combo that could give me head start?

Barnes gives a max of 69.6 H4350 for their 165 TTSX in the 300 WSM. All other sources top out at around 65 grains (including speer), that's quite a difference, can that be right? Same for RL17 in this bullet - they give 68.6 as a max, speer's max is 65.5. Is it the bullet is that much more...

Ya I wish it had a 24" barrel but wanted to try a Tikka. I figure I'm only losing around 50FPS though.

Thanks guys! Man why are Alliant's load data numbers on their website so low? They give a MAX of 51.3 for the 120 partition.

Anyone care to share a Quickload for 115 Ballistic Tips and 120 Partitions for RL 26? For a Tikka 22.4" barrel?

Thanks. Have you played with RL26 in the 115s or 120s? I see Alliant has load data for them now.

IMR 4350 is listed in the Nosler data as the most accurate for the 115s. I have H4350 on hand and was thinking it would be better since it's not supposed to be temp sensitive. Does anyone have a load for H4350 and the 115s? I tried Retumbo but my group opened up at 57.5. I'm looking to shoot...

Haha - No, I'm into reloading I'll take the 260! I won't shoot suppressed and have to admit I don't really get the 20" barrel but have an open mind about it, and it would be a neat little package. I'd probably take whatever I got the best deal on.