Search results

I've never crimped for them, I treat them like any other mag fed gun.

I have some 95gr NBT's to try but the 80 TTSX and 80 GMX will be hard to unseat from my .243's.

Mine has been accurate from 55-105gr bullets. I hunt whitetails with the 80 TTSX and 80 GMX but I have some 95gr NBT's to test out also.

.005 for me

Same here but I used the 180 Partition

Harmonics I rekon Seat them deeper

I really like Nosler bullets but I am usually 100fps and usually closer to 200fps behind their numbers. I would love to have their magic barrels though.

That would be my guess too

Mine did it with 1x fired brass and my primer pockets were fine. Winchester has never returned any call or email that I have sent their way about the primers I had.

No Win Primers for me after they pitted my bolt face. Quite a few have had trouble with them: http://www.24hourcampfire.com/ubbthread ... k_question

http://www.midwayusa.com/product/181942 ... box-of-100 or the 70gr Blitzking if you could find some

30-30 Super 14 here, it's silly accurate.

If I'm going for steel or paper I load groups of 50 - 100 of a proven load. For hunting loads I only load groups of 20, that gives me a few to check zero with and then some to hunt with.

Looks good This makes me want to unearth my 300 Wby.

I have pulled the seater stem, chucked it in a drill, loaded a bullet with polishing compound and lapped them before with good results. I have an RCBS set that wanted to pull every 220 Speer I loaded in my .358 win. A little time with some lapping compound cured it of it's evil ways.

I don't load 4350 in my /06's with 180's but that looks a bit high to me. I have a PDF with the 180 PT with H4350, Lapua Brass, Fed 210. 56grs gives an average chamber pressure of 59,500psi and 57grs gives an average of 62,300psi

You may shoot a lot so this may not apply to you, but practice a lot at ranges from 300-600yds if you are planning to shoot that far. A friend who hunts knew I shoot longer ranges some and he wanted to try his hand at it. His guns are zeroed 1.5" high @100yds and both he brought are...

I've never hunted Utah but I use a 200yd zero on everything that isn't a lever gun and if it's something I shoot a lot then it has a scope with a turret on it so I can dial for distance.

My 260 has a rough barrel after 50-60 rounds it has to be cleaned to keep accuracy. I have wondered if a Tubbs Final Finish would help it out?

Looks weird, won't hurt anything. That's a lot of RL22 in a 30/06 case