Search results

Thanks Mike & Scotty. Currently some IMR & Alliant powders are still available and I think R26 is EU compatible. Not sure about this though. I’ll check it out as many USA manufactured propellants are no longer being shipped to Europe. All due to some heath & safety issue dreamed up by the EU...

Ha ha....law of diminishing returns springs to mind :roll: Think of it more or less as an engineering project ... sort of moving toward a doctorate without the hat & gown (y) So many angles and advice to find and chase. But 1/2” @ 100yds is a perfectly good hunting round. And remember even...

Definitely looking forward to using it E .. friends are using them on the reds now for the last two seasons & I'm just catching up. Two have Sako Finnlite's and one has a Lakelander. Another has 6.5x68 vom hoffe and another has 6.5x47Lapua. They certainly are dropping the stags cleanly. Not...

OK, so this is it scoped up, fully sorted, Zeiss 8x56 off my K95 and just requires zeroing tomorrow morning .. then, ready to go. & just for fun, a couple of pics of my K95 now glassed up with the S&B 8x56

Sounds exactly what SjB said..ring mark at the bottom of the case body above the rim where the cartridge case doesn’t get fully sized inside a full length sizing die. Absolutely normal. Getting your charge and bullet seating tuned in correctly will reduce your groups but its all down to case...

Ha .. we’ll see later this year, but I’m hoping so Scotty. I hope I’ll be able to take a roebuck in Scotland before then though, but stags are something else again and I relish the forthcoming season, especially the rut. I’d love to take another big boy with it! Thanks to all you guys for your...

On Saturday it’s getting a airing at the range to zero it. First with some 120gn Nosler BT bullets, then when done, some testing with 140gn SST’s & IMR4350. I’m kinda hoping it performs well. I’ll stick another pic on with it scoped & ready for action on 1st April for bucks in Scotland (y) (y)

Well here it is, Steyr Mannlicher Classic 6.5x55 SE, although it’s now scoped. I put the Zeiss 8x56 (1” tube) from my K95 onto this Stutzen. The Blaser K95 now has a Schmidt & Bender 8x56 (30mm tube) on it.

I use a couple of RCBS Uniflows I’ve had for many years, together with 5-0-5 beam scales & Redding trickler. Works for me.

I have never tried Retumbo or the bullet you're testing, but I have used consistently over the years IMR4831 and the 110gn Accubond bullet. I have the bullet seated at .040" from the lands and measuring with a comparator 2.870" is my cartridge length. I don't know the bullet you're testing, but...

Works for me too, but I enjoy working up the loads for other rifles I buy, & when they’re sorted, they stay that way.

There is a movie ‘The Ghost & the darkness’ .. 1997 with Val Kilmer & Michael Douglas about the maneaters of Tsavo .. been there many times man & boy many hunters back then used .303 with fmj bullets to shoot dangerous game. I have no knowledge of the .30-06 and its use in Africa in the early...

And so it did Guy, it remains a very popular cartridge over here. But, you could have used the word ‘help’ sort things out on this side of the water :wink: we did do our bit before you got here and freely admit, without US aid (y) our forebears would have endured a lengthier as well as...

Sounds like far toooo much gun for me Scotty, I like the gentler touch :wink: Several pieces of good English stuff on this link though: https://www.guntrader.uk/Guns-For-Sale/ ... -6e40-812e

Unfortuately not. It’s highly likely/virtually certain the original barrel will be destroyed during removal. A bit of a bummer really as that was my initial hope. P.M. sent Guy.

Thanks DrMike, nice to have it appreciated. Currently, the original barrel is shot out and though all the provenance is there, before it can be used once more on live quarry, it will be rebarreled. The original MSch M1903 6.5x54 chambering will be preserved. A Krieger barrel is due to arrive at...

.275 Rigby is of course 7x57Mauser which is recognisable as the cartridge of choice in a Mannlicher Schoenauer of Karen von Blixen in the early 1900’s, others also of the period favoured it too and its popularity is still very evident.

Man alive, there are a few cool European cartridges & yes, the UK is indeed in Europe (Even though we want out of the Federal States of Europe dictatorship) with the likes of H&H and Westley Richards etc making fair old contributions with their cartridges, guns and modifications. Personally, I...

I disagree with this. I have one of these Lee Collet Neck Dies and have tested it thoroughly. Yes the die is inexpensive and the process simple & quick (Therein lies its attraction) The case neck/body run out is very variable, sometimes OK’ish and often not. Certainly not of the low...

I F/L size to fired case headspace dimension. The ‘O’ ring provides float to aid centralising the die to the case, as well as allowing tweaking up/down for exact sizing. Setting the expander/decap rod .. loosen rod, drive case into die, withdraw until you feel the expander enter case neck...