I'm fortunate in that I don't have a 'magazine limitation' to contend with on my rifle.
Also, I have what would appear to be, a long freebore.
Currently though, I'm also testing Viht. N560 propellant with a COAL at 3.204"
Comparator dimension with the 110gn AB is 2.688"
I haven't yet settled on...
I have a 22” barrel & use 53gns IMR4831 with a cartridge OAL of 3.400” using the AB 110gn bullet.
That’s a long seating, but still leaves .045” freebore to lands.
MV is around 3,130 fps.
Primers I use are Fed.210M & Remington brass.
Given reasonable to fair range conditions, this combo will...
F/L resizing to your fired case headspace dimension and annealing regularly will ensure extended case life.
I try very hard never to move case shoulders back more than .002”, it’s pretty achievable & significantly helps case life.
I’m still reloading good RP brass that’s fourteen years old and...
A number of propellants perform well with 100gn bullets in .25-06Rem.
Personally I use H4350 with the Sierra #1620 Prohunter bullet giving an MV of around 3,250 fps.
I use it extensively on red deer hinds in Scotland with excellent results.
For the stags though, I favour the Nosler 110gn AB...
Now this, I think really has merit.
After all, a Chrony while inexpensive and only used in general field testing will never provide lab. quality data, so it follows an average over a considerable number of shots would get you closer to your own barrel/ammunition performance, but still leaving a...
Yesterday With a good friend we chrono’d his ammunition - 6.5x55SE.
His loads are very accurate, around 3/4” @ 100yds, so consistently pretty fair.
Set chrono up & shoot five rounds with avg. MV established at 2788fps.
Then another five rounds shot, and average fps similar resulting in the...
From the hunting perspective, some of the biggest names in hunting African dangerous game in the early 1900’s, Finch-Hatton, WDM ‘Karamoja’ Bell, the von Blixens et al, commonly used the Mannlicher Schoenauers of their day in 6.5x54 or 7x57/.275 Rigby. But plainly bigger stompier...
It’s interesting there are so many contradictory views on nickel cases.
Personally, I’ve used the same cases (Rem.) for quite a few years and rarely encountered any issues with regard to any aspect of their use.
Certainly no problems reloading them and it’s only over the last three years I’ve...
Hi Yoda, I have to say copper fouling in my own barrel is very low and IMR4831 has always given better MV (3,120fps/53gns IMR4831) with the 110gn AB bullet. Metering it is a pain though & a trickler essential.
I seat the 110gn AB .040” from the lands & invariably accuracy is .025” MOA @ 100yds...
So what do you guys think about the metering of IMR7977 through a RCBS Uniflo?
Is it sticky like IMR4831? or smooooother ... would love that!
The numbers you're getting Yoda seem interesting,
e.g. if I knock off 40fps per inch from my shorter 22" barrel, that's 3 x 40=120fps less.
Makes your...
I use the Sinclair guage, may not be the best, but good enough for me.
I don’t much like the idea of the guages that permit bullet adjustment/movement corrections because I can’t see how moving the bullet wouldn’t affect neck tensions.
At the range, in ‘controlled conditions’, definitely inside 1”@100yds minimum standard.
In the field on live quarry ... anything that knocks the beast over with a clean kill from the wet, shitty, most uncomfortable shooting position I almost always find myself in when hunting.
(But I love it...
Ha LRH, when your great great grandfather left Ireland, no such hoops to jump through to own & posess a firearm existed. Politicians as the old saying goes are (and media hype) the enemy of firearms.
As for hunting in the UK, well, ten minutes drive from my home there are red stags/deer that I...
I use an opaque plastic box resting on the rods over my chrony, the ends cut away so the bullet can pass through. Always seems to work very well when sunny and keeps it all dry should it rain.
It’s also rather more wind resistant, but does have a limit.
You can also just mod an opaque plastic...
Checking at the range yesterday, R17 is, but not R26.
Anyway, the stutzen shows good promise.
Shoots well with Norma 120gn Nosler factory & not so bad with my 140gn SST reloads.
Not great, but not bad. All would easily take a red stag.
But, there is a ‘set trigger’ issue I need to sort out.
Dry...