Search results

That a very High velocity round for Whitetails to avoid meat damage I suggest a good Barnes Bullet and Swift A frame with RL22 worked good for me as well as IMR 7828 with Fed 215 primers. Weatherby loaded the 120gr Partition for years in the 257 WBY with Norma MRP powder.

Some of those Turkey made SxS are good fitting But always been a fan of older REM 870 wingmasters with the steel parts. I carry an old 870 with a 18.5” cylinder barrel and attached Leupold DPP with Breneke Slugs I keep in the RV for Bear over the years I got the complete REM VR barrels set...

Find a good older Rem 870 Wingmaster and find a complete set of original Vent Rib barrels starting with the 18.5” Cylinder and Deer Slug Barrel. Love that 26” VR IC barrel for grouse hunting. LC Smith for DB or Fox Sterlingworth

Partition Golds in 180gr great bullet for Moose especially in 300 Win Mag to 300 Ultra Mag.

Not up to date Ramshot Grand missing

1 would think RL22 would serve better with heavier 200gr in 30-06.

Over the years since the early 70’s with the first Nosler No 1 manuals loads have been reduced from the Original loads by Speer in the 60’s manuals. Today I use the MAX load as my starting point most of the time. I don’t even reference manual velocity as they never match realistic loads of the...

Great bullet Partition made even better by the Gold Partition ! I still have a few in 180gr and 250gr for the .338.

Great rifle 760 in 270 win Take a good look at IMR 4064 @ 49.5 with 130 grain Nosler Partition or Speer Grand Slam But those 130gr Power Point will serve you well on deer . I prefer Winchester or Norma brass I have always used RCBS Small base sizer die with Rem 742 and 760 and the Lee Factory...

Loaded up some 338 RUM with 250 LRX at 94.0 to try with Ram Shot Grand.

Shot every thing from deer to moose / bear with the Sierra 250 FPJ in my Ruger Redhawk 44 Mag.

30-30 Win Grew up chasing bears in Western NC mostly behind plott hounds I My old 1953 Win 94 using WIn 170gr Silvertips were very popular. Still have my Winchester of my youth 50 years later ! Harvested several wild boars with that rifle in the 300 lb range best pork I have ever had.

Actually it’s 75% to 80% retention weight for the Nosler Part. Great bullet design it’s a legend in the hunting world. The Swift A Frame which is another A-frame designed bullet bonds their core for a 90% plus retention weight . Both excellent bullets that I use in .338 WM with the 225gr weight .

Partition Golds were very good ! Especially for moose !

In Lapua don’t go over 2750 fps MAX with 285 ELDM and try to keep shot 300 yard plus and only lung shots suggested. I use the 285 ELDM for moose hunting .

In my BAR for 40 years I have used RCBS Small Base Sizer Die in 30-06 and 300 WM. IMR 4350 performed excellent ! Mostly used 180 gr Partitions for everything. In my 30-06 my favorite load was 56.0 of IMR 4350 preferred WW or Norma brass. Really like the Lee Factory Crimp Die for applying the crimp.

Christensen Arms Mesa LR is 27”’ In CA MPR chassis

Hornady 285gr ELD-M Retumbo 88.5 Fed 215 primer Lapua brass COAL: 3.750” Mag Length Trim brass 2.714” .365” Neck Bushing CA Mesa LR Target Velocity 2745 fps

I work my 10mm and 45 Super loads up to the 700 FPE or just under area and stop. Here in Alaska for Grizzly protection I don’t use Hollow Points. It’s deep penetration bullets like Hardcast like RimRock TS bullets heavy bullets. The Glock 20 in 10mm is very popular here in Alaska very few carry...